Configuring LILO - Revision history

Mdean: Fixed tag.

2015-11-13T22:43:10Z

Fixed tag.

Rossi at 22:30, 13 November 2015

2015-11-13T22:30:32Z

Kyoungmeyer: FinalDraft

2015-11-13T22:27:10Z

FinalDraft

Mdean: Revised and marked for Review.

2015-11-13T22:17:58Z

Revised and marked for Review.

Bserrano at 21:50, 11 April 2014

2014-04-11T21:50:13Z

Mdean: Marked for revision.

2014-03-17T18:11:44Z

Marked for revision.

Bserrano at 21:39, 6 March 2014

2014-03-06T21:39:56Z

Mdean: Reverted.

2014-01-03T18:23:13Z

Reverted.

Mdean: Reverted edits by Mdean (talk) to last revision by Mgloff

2014-01-03T18:21:52Z

Reverted edits by Mdean (talk) to last revision by Mgloff

Mdean: Undo revision 2419 by Mgloff (talk)

2014-01-03T18:19:33Z

Undo revision 2419 by Mgloff (talk)

← Older revision		Revision as of 22:43, 13 November 2015
Line 1:		Line 1:
−	{{todo\|Complete (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)(11.13.2015-16:25->KY+);(11.13.2015-16:30->\|Mike Dean\|project=oe 4,oe 5,md,Complete,mw,bs,er}}	+	{{todo\|Complete (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)(11.13.2015-16:25->KY+);(11.13.2015-16:30->ER+)\|Mike Dean\|project=oe 4,oe 5,md,Complete,mw,bs,er}}

← Older revision		Revision as of 22:30, 13 November 2015
Line 1:		Line 1:
−	{{todo\|~~FinalDraft~~ (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)(11.13.2015-16:25->KY+)\|Mike Dean\|project=oe 4,oe 5,md,~~FinalDraft~~,mw,bs}}	+	{{todo\|Complete (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)(11.13.2015-16:25->KY+);(11.13.2015-16:30->\|Mike Dean\|project=oe 4,oe 5,md,Complete,mw,bs,er}}

← Older revision		Revision as of 22:27, 13 November 2015
Line 1:		Line 1:
−	{{todo\|~~Review~~ (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)\|Mike Dean\|project=oe 4,oe 5,md,~~Review~~,mw,bs}}	+	{{todo\|FinalDraft (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)(11.13.2015-16:25->KY+)\|Mike Dean\|project=oe 4,oe 5,md,FinalDraft,mw,bs}}

@@ Line 1: / Line 1: @@
-{{todo|SEOKWREV - Revise with configuring kernels and example config file (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+)|Mike Dean|project=oe 4,oe 5,md,SEOKWREV,Revise,mw,bs}}
+{{todo|Review (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+);(11.13.2015-16:15->MD+)|Mike Dean|project=oe 4,oe 5,md,Review,mw,bs}}
@@ Line 5: / Line 5: @@
 |title=Configuring LILO
 |titlemode=append
-|keywords=LILO,Configuration File
+|keywords=LILO,LILO Configuration,LILO config
 |description=This page describes the parts of the LILO bootloader configuration file, and provides guidance on how to work with it.
 }}
 ==Configuring LILO==
@@ Line 18: / Line 20: @@
 The LILO configuration file is split into two sections: global and per-image.  The global section, as the name implies, specifies options that pertain to LILO itself and to all images specified in the file.  The per-image section specifies options that apply to a specific image, some of which may override the global options.
 ====Global Options====
@@ Line 49: / Line 83: @@
 Actually using these options to create a configuration file is done most easily by copying the EMAC provided LILO configuration file, then modifying the copy.  It is a good practice to make sure a bootable flash card is set aside in case of difficulties with getting the modified flash card back into a bootable state.

← Older revision		Revision as of 21:50, 11 April 2014
Line 1:		Line 1:
−	{{todo\|~~SEOKWTODO~~ - Revise with configuring kernels and example config file (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-)\|Mike Dean\|project=oe 4,oe 5,md,~~SEOKWTODO~~,Revise,mw,bs}}	+	{{todo\|SEOKWREV - Revise with configuring kernels and example config file (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-);(04.11.14-16:50->BS+)\|Mike Dean\|project=oe 4,oe 5,md,SEOKWREV,Revise,mw,bs}}
		+
		+
		+	{{#seo:
		+	\|title=Configuring LILO
		+	\|titlemode=append
		+	\|keywords=LILO,Configuration File
		+	\|description=This page describes the parts of the LILO bootloader configuration file, and provides guidance on how to work with it.
		+	}}

	==Configuring LILO==		==Configuring LILO==

← Older revision		Revision as of 18:11, 17 March 2014
Line 1:		Line 1:
−	{{todo\|SEOKWTODO(12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-)\|Mike Dean\|project=oe 4,oe 5,md,SEOKWTODO,mw,bs}}	+	{{todo\|SEOKWTODO - Revise with configuring kernels and example config file (12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-);(03.17.14-13:10->MD-)\|Mike Dean\|project=oe 4,oe 5,md,SEOKWTODO,Revise,mw,bs}}

	==Configuring LILO==		==Configuring LILO==

← Older revision		Revision as of 21:39, 6 March 2014
Line 1:		Line 1:
−	{{todo\|~~Complete~~(12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+)\|Mike Dean\|project=oe 4,oe 5,md,~~complete~~,mw}}	+	{{todo\|SEOKWTODO(12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+);(03.06.14-15:40->BS-)\|Mike Dean\|project=oe 4,oe 5,md,SEOKWTODO,mw,bs}}

	==Configuring LILO==		==Configuring LILO==

@@ Line 1: / Line 1: @@
-{{todo|(12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+)|Mike Dean|project=oe 4,oe 5,md,mw,complete}}
+{{todo|Complete(12.16.13-02:25->MD+);(12.16.13-15:15->MD+);(12.17.13-11:45->MW+);(12.17.13-15:25->KY+)|Mike Dean|project=oe 4,oe 5,md,complete,mw}}
 ==Configuring LILO==
-LILO is easily configurable by editing the lilo.conf file then [[Installing_LILO | running LILO ]] to use the new configuration options. The configuration for LILO created by EMAC and shipped with a system will usually suffice, although customization may be required. The information provided here provides a description for the important lilo configuration options.
+As with any software of moderate or better complexity, configuration is required for LILO to function as desired.  The configuration created by EMAC and shipped with a system will usually suffice.  However, sometimes enough customization is required that the bootloader itself will need to be reconfigured.  Even if custom configuration isn't required, some of this information is important for protecting against accidentally overwriting the bootloader on a developer's desktop with a bootloader that was intended for an embedded machine.
-lba32
+This page describes the parts of the LILO bootloader configuration file, and provides guidance on how to work with it.  The other LILO pages describe how to install and use the bootloader after it has been configured.
 ===Sections of the LILO Configuration File===
-The LILO configuration file is split into two sections: global and per-image.  The global section specifies options that pertain to LILO itself and to all images specified in the file.  The per-image section specifies options that apply to a specific image, some of which may override the global options.
+The LILO configuration file is split into two sections: global and per-image.  The global section, as the name implies, specifies options that pertain to LILO itself and to all images specified in the file.  The per-image section specifies options that apply to a specific image, some of which may override the global options.
 ====Global Options====
@@ Line 38: / Line 15: @@
 The LILO configuration file needs the following options, at a minimum, configured for the global settings:
-* <code>disk</code> This option specifies the disk to which the LILO bootloader needs to be written.  This should always point to the device node currently associated with the disk.  For example, when mounted on a desktop, this may be <code>/dev/sdc</code>, which is (usually) the third "SCSI" device connected to the system.  If it were mounted through the IDE subsystem instead, its device node would appear like <code>/dev/hdc</code> instead.
+* <code>disk</code> This option specifies the disk to which the LILO bootloader needs to be written.  This should always point to the device node currently associated with the disk.  For example, when mounted on a desktop, this may be <code>/dev/sdc</code>, which is (usually) the third "SCSI" device connected to the system.  The first would be <code>/dev/sda</code>, the second <code>/dev/sdb</code>, etc.  Even though the device may not be a SCSI device, it may be mounted via a generic SCSI driver, which is why it can appear as a SCSI device.  If it were mounted through the IDE subsystem instead, its device node would appear like <code>/dev/hdc</code> instead.
 * <code>map</code> This option specifies the location of the map file to use.  Usually, this will be <code>/boot/map</code>.
 * <code>lba32</code> This option tells LILO to use 32-bit Logical Block Addresses instead of cylinder/head/sector addresses.  This is needed for any disk with more than 1024 cylinders.  Since the vast majority of modern drives have more than 1024 cylinders, this option should always be specified.
@@ Line 45: / Line 22: @@
 '''Additional useful options:'''
-* <code>vga</code> For systems which have video, this option specifies the video mode the device should use while booting.
+* <code>vga</code> For systems which have video, this option specifies the video mode the device should use.  The parameter to pass comes from the BSP (Board Support Profile) layer for the board.  If unsure what to set here, EMAC can provide assistance with this.
-* <code>serial</code> This option allows the bootloader to accept input from a serial line and specifies a serial device and configuration to which a console should be attached. For example, to use the <code>/dev/ttyS0</code> serial device (the default console port on many boards) as a serial console which communicates as 115,200 baud, 8 bits, with no stop bits: <code>serial=0,115200n8</code>
+* <code>serial</code> This useful option specifies a serial device to which a console should be attached, as well as the configuration settings for the console.  For example, to use the <code>/dev/ttyS0</code> serial device (the default console port on many boards) as a serial console which communicates as 115,200 baud, 8 bits, with no stop bits: <code>serial=0,115200n8</code>
-* <code>timeout</code> This specifies the amount of time to wait before timing out and continuing on with the boot process using the configured defaults. This allows some time for the user to hit ''TAB'' to specify additional options to the kernel. This value is specified in deciseconds and must be greater than 0.  For example, to set this value to 4.3 seconds: <code>timeout=43</code>
+* <code>timeout</code> This specifies the amount of time to wait before timing out and continuing on with the boot process using the configured defaults.  This value is specified in deciseconds.  For example, to set this value to 4.3 seconds: <code>timeout=43</code>
 * <code>read-only</code> This option tells LILO to mount the root filesystem as read-only.  This is usually desired, since the Linux kernel will remount the device as writeable (if it needs to) once the boot process has been handed over to it.
 * <code>install</code> This option specifies the type of screen which will be seen when the bootloader starts.  Normally, this will be set to <code>text</code>, which presents the simple interface shown in the examples on this page.  The <code>menu</code> option provides a nicer way to select an image to boot, but is usually not desirable to have on an embedded machine.  The <code>bitmap</code> option provides a graphical boot screen which looks very nice on a desktop installation, but is usually only used on an embedded machine when the product calls for showing graphics as early in the boot process as possible; a logo is typically placed here in such a case.
 ====Per-Image Options====
@@ Line 57: / Line 32: @@
 The following options are needed to configure images to be available to boot with LILO:
-* <code>image</code> This option specifies the location of the kernel to boot.  Commonly, this will be <code>/boot/bzImage</code> or <code>/boot/bzImage-custom-3.10.2</code>. bzImage is commonly a symbolic link to the actual kernel filename. This is done so that lilo.conf does not have to be changed when a new kernel is installed.
+* <code>image</code> This option specifies the location of the kernel to boot.  Commonly, this will be <code>/boot/bzImage</code> or <code>/boot/bzImage-custom-3.10.2</code>
-* <code>root</code> This option specifies the root partition of the device to mount for the image. This is typically <code>/dev/hda1</code> or <code>/dev/sda1</code>
+* <code>root</code> This option specifies the root partition to mount for the image.  This is typically <code>/dev/hda1</code> or <code>/dev/sda1</code>
 * <code>label</code> This option tells LILO by what name to call the image.  For instance, this is usually <code>label=emac-oe</code> for a standard EMAC image, but for a custom product under development, it might be <code>label=custom-image-test-v3</code>
 ====Working with LILO Configurations====
-The above information describes the common options and how to set them.  Additional information can be found by reading through the manual page for <code>lilo.conf</code>.  This manpage is available on many sites online and on the [http://lilo.alioth.debian.org/olddoc/html/user_21-5.html LILO user's guide.]
+The above information talks about the common options and how to set them.  Additional information can be found by reading through the manual page for <code>lilo.conf</code>.  This manpage is available on many sites online.
-[[Installing LILO]]
+Actually using these options to create a configuration file is done most easily by copying the EMAC provided LILO configuration file, then modifying the copy.  It is a good practice to make sure a bootable flash card is set aside in case of difficulties with getting the modified flash card back into a bootable state.