Getting Started with the DEV-SOM36 - Revision history

Btisler at 20:20, 3 August 2021

2021-08-03T20:20:40Z

Btisler at 20:20, 3 August 2021

2021-08-03T20:20:14Z

Btisler at 20:08, 16 July 2021

2021-07-16T20:08:38Z

Btisler at 18:02, 16 July 2021

2021-07-16T18:02:53Z

Btisler: Initial commit of this combos getting started

2021-07-16T18:01:42Z

Initial commit of this combos getting started

New page

{{#seo:
|title=Getting Started with the DEV-SOM36
|titlemode=append
|keywords=DEV-SOM36 Getting Started
|description=The following page can be used to get familiarized with the DEV-SOM36.
}}



This page outlines a basic guide to getting starting using the DEV-SOM36.
* [[DEV-SOM36 | DEV-SOM36 Hardware Main Page]]







{{:Templateimpl:geninfo | initials=BT | title=SOM36 Getting Started | desc=The following page can be used to get familiarized with the DEV-SOM36. | project=OE 5.4 }}
=== What Comes with the Development Kit ===
* SoM-A536P (536MHz Embedded Atmel ARM Cortex A5 ATSAMA5D36, 4GB eMMC, 512MB SoM, connected to Carrier Board)
* SoM-215GS (Dlx Carrier with Wifi/BT & Audio)
* 5V 3A Wall Power Supply
* 10 Pin Com to DB9 Cable 12"
* RJ45 to RJ45 Ethernet Cable 3'

=== Tools Required ===
* Desktop PC (Linux or Virtual Linux Machine)
** Instructions for Downloading a [[Getting_Started_With_EMAC_Virtual_LDC#Getting_Started_With_EMAC_Virtual_LDC|Virtual Machine with EMAC OE SDK pre-installed]]

== Setup ==
1. Install EMAC OE SDK on your computer.
* Installation options are linked [[Getting_Started_with_the_EMAC_OE_SDK#Installing_EMAC_SDK|HERE]].
2. Make the following cable connections using the cables provided:
* Board Micro-USB to USB Desktop
* Board Ethernet to Ethernet Network
* 5V Wall Power Supply to Board Power (may be left unplugged from wall until Step 3)
3. Open [[Getting_Started_With_Minicom|Minicom]] and create a terminal session with the DEV-IOT6U
* After supplying power, boot messages will be displayed followed by a '''log in''' prompt.
** '''soma5d36 login: root'''
** '''password: emac_inc'''
* Use command "ifconfig" in the terminal session to find the device's IP address that can be used during the development process.

== Development ==
There are two options in development with this device: </br>
1. Using the EMAC OE SDK on terminal. [ [[Getting_Started_with_the_EMAC_OE_SDK | Getting Started with the EMAC OE SDK]] ] </br>
- or </br>
2. Using the EMAC OE SDK on Qt Creator. [ [[Getting_Started_With_Qt_Creator|Getting Started With Qt Creator]] ]




== Further Information ==



* [[DEV-SOM36 | DEV-SOM36 Hardware Main Page]]

@@ Line 53: / Line 53: @@
 == Further Information ==
 Serial Ports:
-/dev/ttyS0 is the console (JK2)
+*/dev/ttyS0 is the console (JK2)
-/dev/ttyS1 is COM D (HDR3)
+*/dev/ttyS1 is COM D (HDR3)
-/dev/ttyS2 is COM A (HDR4)
+*/dev/ttyS2 is COM A (HDR4)
-/dev/ttyS3 is COM C (HDR2)
+*/dev/ttyS3 is COM C (HDR2)
 <!-- {{:Templateimpl:whatnext | initials=BT | title=Getting Started with the EMAC OE SDK | desc=Basic tutorial for using the EMAC OE SDK. | project=OE 5.4 }} -->
 * [[DEV-SOM36 | DEV-SOM36 Hardware Main Page]]

@@ Line 33: / Line 33: @@
 * Installation options are linked [[Getting_Started_with_the_EMAC_OE_SDK#Installing_EMAC_SDK|HERE]].
 . Make the following cable connections using the cables provided:
-* Board Micro-USB to USB Desktop
+* Board Micro-USB to USB Desktop (Console port connection)
 * Board Ethernet to Ethernet Network
 * 5V Wall Power Supply to Board Power (may be left unplugged from wall until Step 3)
-. Open [[Getting_Started_With_Minicom|Minicom]] and create a terminal session with the DEV-IOT6U
+. Open [[Getting_Started_With_Minicom|Minicom]] or perfered terminal emulator and create a terminal session with the DEV-SOM36
 * After supplying power, boot messages will be displayed followed by a '''log in''' prompt.
 ** '''soma5d36 login: root'''

@@ Line 20: / Line 20: @@
 === What Comes with the Development Kit ===
 * SoM-A536P (536MHz Embedded Atmel ARM Cortex A5 ATSAMA5D36, 4GB eMMC, 512MB SoM, connected to Carrier Board)
-* SoM-215GS (Dlx Carrier with Wifi/BT & Audio)
+* SoM-215GS (Dlx 200p Carrier 2x Eth w/ LCD)
 * 5V 3A Wall Power Supply
 * 10 Pin Com to DB9 Cable 12"