Example serial test

TODO: {{#todo:InProgress(12.31.13-13:58->JG+)|Jgreene|oe 4,oe 5,jg,md,Review}}

This is a guide to the serial C example project included in the EMAC OE SDK.

This application sets up and tests asynchronous IO on a serial port using poll() and fasync().

The serial project builds one executable: serial_test.

Opening, Building and Uploading the Project Files

1. Open the C/C++ editing perspective.

stub

2. Open the project files.

stub

3. Build the project.

stub

4. Upload the executables to the target system.

stub

Usage and Behavior

serial_test performs an asynchronous IO test on the specified serial device using either poll or FASYNC mode. It performs the test, reports, test, report, etc. It will keep running until it is stopped manually via CTRL-C.

Hardware Requirements

It should run just fine on any device with a serial port.

Using serial_test

./serial_test DEVICE -p|-a 

DEVICE

The serial device to use

-p

Use poll mode for asynchronous IO

-f

Use FASYNC mode for asynchronous IO

Usage Example. Test asynchronous IO using the poll mode

Perform the test on device /dev/ttyS1

root@som9g20:/tmp# ./serial_test /dev/ttyS1 -p
Testing on /dev/ttyS1 using poll() 
Received: : 21
Received: : 11
Received: : 6
Received: : 2
Received: : 1
Received: : 1
.
.
.
Received: : 1
Received: : 1
Received: : 1
^C

...we hit CTRL-C to stop testing. No errors were reported.

Usage Example. Test asynchronous IO using the FASYNC mode

Perform the test on device /dev/ttyS1

root@som9g20:/tmp# ./serial_test /dev/ttyS1 -f
Testing on /dev/ttyS1 using FASYNC 
Received SIGIO signal.
: : 21
Received SIGIO signal.
: : 11
Received SIGIO signal.
: : 6
Received SIGIO signal.
: : 2
Received SIGIO signal.
: : 1
Received SIGIO signal.
: : 1
Received SIGIO signal.
: : 1
.
.
.
Received SIGIO signal.
: : 1
Received SIGIO signal.
: : 1
Received SIGIO signal.
: : 1
^C

...we hit CTRL-C to stop testing. No errors were reported.