Difference between revisions of "LILO Overview"

From wiki.emacinc.com
Jump to: navigation, search
(Initial first portion; saving to prevent accidental loss.)
 
(18 intermediate revisions by 5 users not shown)
Line 1: Line 1:
−
{{todo|In Progress(11.27.13-01:00->MD+)|Mike Dean|project=oe 4,oe 5,md,InProgress}}
+
{{todo|SEOKWREV(11.27.13-01:00->MD+);(11.27.13-17:50->MD+);(12.16.13-02:30->MD+);(12.16.13-10:50->MW-);(12.16.13-12:30->MD+); (12.16.13-12:57->MW+);(12.16.13-18:30->KY+);(03.06.14-15:35->BS-);(04.11.14-16:30->BS+);(04.14.14-11:00->BS+)|Mike Dean|project=oe 4,oe 5,md,SEOKWREV,mw,ky,bs}}
  
−
==The LInux LOader - LILO==
+
{{#seo:
 +
|title=LILO Overview
 +
|titlemode=append
 +
|keywords=LILO,LILO Bootloader
 +
|description=LILO is a bootloader which was created for Linux.  LILO was the default bootloader used for most desktop and server distributions for many years.
 +
}}
 +
=The LInux LOader - LILO=
  
 
LILO is a bootloader which was created for Linux.  LILO was the default bootloader used for most desktop and server distributions for many years.  It is still used on x86 embedded systems because it provides everything an embedded system needs to boot into embedded Linux.
 
LILO is a bootloader which was created for Linux.  LILO was the default bootloader used for most desktop and server distributions for many years.  It is still used on x86 embedded systems because it provides everything an embedded system needs to boot into embedded Linux.
  
−
===Using LILO===
+
==Using LILO==
  
 
When LILO is installed on a drive or partition, LILO will provide a menu at boot time.  This menu typically shows a list of available operating system kernels and/or operating systems from which a user may select.  On embedded systems, this menu is typically streamlined down to a very simple interface.
 
When LILO is installed on a drive or partition, LILO will provide a menu at boot time.  This menu typically shows a list of available operating system kernels and/or operating systems from which a user may select.  On embedded systems, this menu is typically streamlined down to a very simple interface.
  
−
When LILO is configured with a timeout, as it usually is, a user may simply wait for the duration of the timeout for LILO to boot the operating system and kernel which have been configured as default for the system.  If the user doesn't wish for the default to boot, the user may press the enter key before the timeout duration has expired to access alternative options.
+
When LILO is configured with a timeout, as it usually is, a user may simply wait for the duration of the timeout for LILO to boot the operating system and kernel which have been configured as the default for the system.  If the user doesn't wish for the default to boot, the user may press any key other than the <code>Enter</code> key before the timeout duration has expired to access alternative options. If the user presses enter during the timeout delay, the timeout immediately expires and the boot process continues with the default configured OS and kernel.  The default boot process starts as shown here:
  
−
'''TODO: boot a system which has LILO, describe this in more depth and provide example terminal output.'''
+
<syntaxhighlight lang="text">
 +
LILO 22.8 boot:
 +
Loading emac-oe................................................
 +
BIOS data check successful
 +
</syntaxhighlight>
  
−
===Installing LILO===
+
Pressing the TAB key will show a list of available OS configurations to boot.  Usually, there will only be one available.
−
-----
 
  
−
====Installing Onto the Local Machine====
+
<syntaxhighlight lang="text">
 +
LILO 22.8 boot:
 +
emac-oe
 +
boot:
 +
</syntaxhighlight>
  
−
Before LILO can be used to boot a system, it must be installed on the boot device.  It must also be reinstalled any time the configuration is changed, or the new configuration will not take effect.  Fortunately, installing LILO is easy.
+
Typing the name of the OS configuration (the OS + kernel) will boot the system with that configuration.
  
−
The easiest way to install LILO on the local system's Master Boot Record with the default configuration file (<code>/etc/lilo.conf</code>), is to type:
+
<syntaxhighlight lang="text">
 +
LILO 22.8 boot:
 +
emac-oe
 +
boot: emac-oe
 +
Loading emac-oe................................................
 +
BIOS data check successful
 +
EMAC OpenEmbedded Linux 4.0 (stable-2009)
 +
Some code contained within Copyright 2008-2010 EMAC, Inc.
  
−
root@oe:/# lilo
+
emac 2009-stable vortex86 ttyS0
  
−
Unfortunately, you probably don't normally want to install LILO this way.  This method works well for desktops and servers, but is often not what you want on an embedded system.  There are exceptions, though, such as when you are working in a console on the embedded machine itself, and it has the LILO configuration in <code>/etc/lilo.conf</code>.  If you have the configuration file somewhere else, however, you will need to type:
+
vortex86 login:
 +
</syntaxhighlight>
  
−
  root@oe:/# lilo -C /etc/alternate_lilo_configuration_file.conf
+
Once the system has booted to the login prompt, the user may log into the system as usual. On EMAC products, the default password for the root account is <code>emac_inc</code>.  Please see [[System_Log_In| System Log In]] for more information regarding the login process.
  
−
The <code>-C</code> (capital C) switch tells <code>lilo</code> to use the configuration file specified after the switch when installing itself.
+
==Additional Abilities of LILO==
  
−
-----
+
In addition to the normal boot selection described above, LILO is also able to pass arguments to the Linux kernel for booting.  These arguments can be useful for enabling output of boot messages, configuring a video driver, and configuring a number of other things which can accept kernel command line configuration options.
−
====Installing LILO Onto a Removable Drive====
 
  
−
Unfortunately, the last method shown above is still not what you need to do when your embedded machine's root drive is not in the running embedded system.  If you have a Compact Flash disk, for instance, containing your Linux filesystem, and it is mounted on your desktop Linux development machine, you will need to jump through a few hoops to install the bootloader onto the Compact Flash card.  This method is usually necessary when you don't yet have a bootable disk for your embedded machine.
+
For example, the <code>console=ttyS0,115200</code> option can be passed to a kernel to enable boot message output to the serial console:
  
−
The following steps will need to be performed to install LILO onto a removable drive:
+
<syntaxhighlight lang="text">
 +
LILO 22.8 boot:                                                                
 +
emac-oe                                                                       
 +
boot: emac-oe console=ttyS0,115200                                             
 +
Loading emac-oe................................................               
 +
BIOS data check successful                                                     
 +
Linux version 2.6.30.10 (mdean@engineering0) (gcc version 4.2.4) #1 PREEMPT Fri Feb 1 18:38:41 CST 2013
 +
KERNEL supported cpus:
 +
  Intel GenuineIntel
 +
  AMD AuthenticAMD
 +
  NSC Geode by NSC
 +
  Cyrix CyrixInstead
 +
  Centaur CentaurHauls
 +
  Transmeta GenuineTMx86
 +
  Transmeta TransmetaCPU
 +
  UMC UMC UMC UMC
 +
CPU: vendor_id 'Vortex86 SoC' unknown, using generic init.
 +
...
 +
...
 +
...
 +
EMAC OpenEmbedded Linux 4.0 (stable-2009)
 +
Some code contained within Copyright 2008-2010 EMAC, Inc.
  
−
<cl>
+
emac 2009-stable vortex86 ttyS0
−
1. Mount the drive.
 
−
 
 
−
On many Linux desktops, a memory card will be automounted when it is inserted.  While this is a nice convenience feature for most users, it comes at the expense of developers.  This automount feature can be a source of frustration for those who haven't already found a way around the issues it causes.
 
−
 
 
−
Fortunately, we at EMAC have already found a method which works reliably on our recommended Linux distribution, Ubuntu 12.04 LTS, and have documented it here. On other systems, such as Debian, a workaround may not be needed.  If your system does not automount, see below.
 
−
 
 
−
=====Workaround for Ubuntu's Automounter=====
 
−
 
 
−
i. Insert the flash card into your card reader, and wait for the file browser window to appear.  If a messagebox appears asking you to choose what to do, tell it to open a file browser for browsing the files on the card.
 
−
* Keep the file browser window open, and stash it away for later use.
 
−
* Open a terminal and create a <code>/mnt/cfcard</code> directory, if it does not exist:
 
−
user@ubuntu:/# mkdir /mnt/cfcard
 
−
* Find out the device name of the card by looking for where the card was mounted.  The file browser window will list the name of the card under Devices in the left pane.  Often times, the name will be EMAC_OE.  Look for this name in the output of the <code>df</code> command:<syntaxhighlight lang="console">
 
−
user@ubuntu:/# df -hT | grep EMAC
 
−
/dev/sdb1                      ext3      3.7G  223M  3.3G  7% /media/EMAC_OE
 
−
</syntaxhighlight>
 
−
* From the output of this command, we can see that the <code>/media/EMAC_OE</code> mountpoint was mounted onto the <code>/dev/sdb1</code> device.  Therefore, this is the device in which we're interested.
 
−
* Mount the device on the directory from step i, without unmounting it first:<syntaxhighlight lang="console">
 
−
user@ubuntu:/# mount /dev/sdb1 /mnt/cfcard
 
−
user@ubuntu:/#
 
−
</syntaxhighlight>
 
−
 
 
−
* Now, switch to the root user account (if you aren't already root) and copy the device node files into the destination filesystem.  The device node file will be needed so that LILO will be able to talk to the flash card.  '''NOTE:''' Use your user's password to switch to root if you use the method shown here:<syntaxhighlight lang="console">
 
−
user@ubuntu:/# sudo su
 
−
[sudo] password for user:
 
−
root@ubuntu:/# cd /mnt/cfcard
 
−
root@ubuntu:/mnt/cfcard#
 
−
root@ubuntu:/mnt/cfcard# cp -a /dev/sdb* dev/
 
−
root@ubuntu:/mnt/cfcard#
 
−
</syntaxhighlight>
 
−
 
 
−
* Now, use the <code>chroot</code> command to make the directory where you mounted the card the effective root directory for your terminal session:<syntaxhighlight lang="console">
 
−
root@ubuntu:/mnt/cfcard# chroot .
 
−
root@ubuntu:/#
 
−
</syntaxhighlight>
 
  
−
* Now that you're effectively running inside the filesystem on the flash card, you are able to run LILO to install the bootloader.  First, be sure to double check to ensure that the configuration file you're using points to the correct device node (in this example, <code>/dev/sdb1</code>) so that you don't overwrite the bootloader on your desktop.  If you overwrite the bootloader on your desktop, '''it will render your desktop system unbootable!'''  So, make sure to double check first.
+
vortex86 login:
−
* When you are sure you're using the right device node, run LILO to install the bootloader:<syntaxhighlight lang="console">
 
−
root@ubuntu:/# lilo -C /etc/lilo.conf.boot
 
−
Warning: '/proc/partitions' does not exist, disk scan bypassed
 
−
Added emac-oe *
 
−
One warning was issued.
 
−
root@ubuntu:/#
 
−
</syntaxhighlight>The warning, in this case, is normal.  It appears because you're in a fake "running system," which means the virtual files in the <code>/proc/</code> filesystem aren't mounted and able to provide information; hence, the non-existence of the <code>/proc/partitions</code> file.
 
−
* Now, you need to umount the device:<syntaxhighlight lang="console">
 
−
root@ubuntu:/# exit
 
−
root@ubuntu:/mnt/cfcard# cd ..
 
−
root@ubuntu:/mnt# umount cfcard
 
−
root@ubuntu:/mnt# exit
 
−
user@ubuntu:/#
 
 
</syntaxhighlight>
 
</syntaxhighlight>
  
−
  * Retrieve the file browser you stashed away earlier, and unmount the automounted directory for the card by clicking on the eject symbol next to the name of the device in the left pane.
+
Other arguments to the kernel are passed in a similar manner. The available options to pass will depend on the specific configuration of the kernel which will be booted by LILO.  A page which contains many more kernel arguments can be found here: https://www.kernel.org/doc/Documentation/kernel-parameters.txt
  
−
It is now safe to eject the card and put it into your embedded machine.
+
==Next Steps==
  
−
=====Installing on Linux Systems Which do not Automount the Card=====
+
Follow these guides for more information:
  
−
</cl>
+
* [[Configuring LILO]]
 +
* [[Installing LILO]]

Latest revision as of 09:59, 14 April 2014

TODO: {{#todo:SEOKWREV(11.27.13-01:00->MD+);(11.27.13-17:50->MD+);(12.16.13-02:30->MD+);(12.16.13-10:50->MW-);(12.16.13-12:30->MD+); (12.16.13-12:57->MW+);(12.16.13-18:30->KY+);(03.06.14-15:35->BS-);(04.11.14-16:30->BS+);(04.14.14-11:00->BS+)|Mike Dean|oe 4,oe 5,md,SEOKWREV,mw,ky,bs}}

The LInux LOader - LILO

LILO is a bootloader which was created for Linux. LILO was the default bootloader used for most desktop and server distributions for many years. It is still used on x86 embedded systems because it provides everything an embedded system needs to boot into embedded Linux.

Using LILO

When LILO is installed on a drive or partition, LILO will provide a menu at boot time. This menu typically shows a list of available operating system kernels and/or operating systems from which a user may select. On embedded systems, this menu is typically streamlined down to a very simple interface.

When LILO is configured with a timeout, as it usually is, a user may simply wait for the duration of the timeout for LILO to boot the operating system and kernel which have been configured as the default for the system. If the user doesn't wish for the default to boot, the user may press any key other than the Enter key before the timeout duration has expired to access alternative options. If the user presses enter during the timeout delay, the timeout immediately expires and the boot process continues with the default configured OS and kernel. The default boot process starts as shown here: 

LILO 22.8 boot:
Loading emac-oe................................................
BIOS data check successful

Pressing the TAB key will show a list of available OS configurations to boot. Usually, there will only be one available. 

LILO 22.8 boot:
emac-oe
boot:

Typing the name of the OS configuration (the OS + kernel) will boot the system with that configuration. 

LILO 22.8 boot:
emac-oe
boot: emac-oe
Loading emac-oe................................................
BIOS data check successful
EMAC OpenEmbedded Linux 4.0 (stable-2009)
Some code contained within Copyright 2008-2010 EMAC, Inc.

emac 2009-stable vortex86 ttyS0

vortex86 login:

Once the system has booted to the login prompt, the user may log into the system as usual. On EMAC products, the default password for the root account is emac_inc. Please see System Log In for more information regarding the login process.

Additional Abilities of LILO

In addition to the normal boot selection described above, LILO is also able to pass arguments to the Linux kernel for booting. These arguments can be useful for enabling output of boot messages, configuring a video driver, and configuring a number of other things which can accept kernel command line configuration options.

For example, the console=ttyS0,115200 option can be passed to a kernel to enable boot message output to the serial console: 

LILO 22.8 boot:                                                                 
emac-oe                                                                         
boot: emac-oe console=ttyS0,115200                                              
Loading emac-oe................................................                 
BIOS data check successful                                                      
Linux version 2.6.30.10 (mdean@engineering0) (gcc version 4.2.4) #1 PREEMPT Fri Feb 1 18:38:41 CST 2013
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
CPU: vendor_id 'Vortex86 SoC' unknown, using generic init.
...
...
...
EMAC OpenEmbedded Linux 4.0 (stable-2009)
Some code contained within Copyright 2008-2010 EMAC, Inc.

emac 2009-stable vortex86 ttyS0

vortex86 login:

Other arguments to the kernel are passed in a similar manner. The available options to pass will depend on the specific configuration of the kernel which will be booted by LILO. A page which contains many more kernel arguments can be found here: https://www.kernel.org/doc/Documentation/kernel-parameters.txt

Next Steps

Follow these guides for more information:

Retrieved from "https://wiki.emacinc.com/index.php?title=LILO_Overview&oldid=3592"