Difference between revisions of "Example atod"

From wiki.emacinc.com
Jump to: navigation, search
m (Approved for Final Draft status.)
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{todo|FinalDraft (12.11.13-15:24->JG+);(01.03.14-16:00->MD+)|Jgreene|project=oe 4,oe 5,jg,md,FinalDraft,mw}}
+
{{todo|SEOKWREV (12.11.13-15:24->JG+);(01.03.14-16:00->MD+);(01.03.14-18:50->KY+);(03.27.14-16:30->BS+);(04.10.14-12:05->BS+)|Jgreene|project=oe 4,oe 5,jg,md,SEOKWREV,mw,bs}}
 +
 
 +
{{#seo:
 +
|title=Example atod
 +
|titlemode=append
 +
|keywords=AtoD,mcp3208,Device Channels
 +
|description=This is a guide to the atod_test C example project included in the EMAC OE SDK.
 +
}}
 +
 
 
This is a guide to the <code>atod_test</code> C example project included in the EMAC OE SDK.
 
This is a guide to the <code>atod_test</code> C example project included in the EMAC OE SDK.
  
Line 8: Line 16:
 
== Opening, Building and Uploading the Project Files ==
 
== Opening, Building and Uploading the Project Files ==
  
<big>1. Open the C/C++ editing perspective.</big>
 
 
stub
 
 
<big>2. Open the project files.</big>
 
 
stub
 
 
<big>3. Build the project.</big>
 
  
stub
+
For information on opening the project from within Eclipse, please see [[Importing the EMAC OE SDK Projects with Eclipse]].  Then, follow [[Using the EMAC OE SDK Projects with Eclipse]] for information on how to build, upload and execute the example.
  
<big>4. Upload the executables to the target system.</big>
 
  
stub
+
Alternatively, the <code>Makefile</code> can be used with the <code>make</code> command from the commandline to build and upload the example.  For more information on this method, please see [[Using EMAC OE SDK Example Projects]].
  
 
==Usage and Behavior==  
 
==Usage and Behavior==  

Latest revision as of 11:04, 10 April 2014

TODO: {{#todo:SEOKWREV (12.11.13-15:24->JG+);(01.03.14-16:00->MD+);(01.03.14-18:50->KY+);(03.27.14-16:30->BS+);(04.10.14-12:05->BS+)|Jgreene|oe 4,oe 5,jg,md,SEOKWREV,mw,bs}}

This is a guide to the atod_test C example project included in the EMAC OE SDK.

This application reads all channels of an indexed atod device and reports the values read from those channels to the console. Examples of this type of device are the processor AtoDs on the SoM-9260/9G20 and the IPAC-9302; and the mcp3208 external AtoD devices on the SoM-150ES carrier (see hardware requirements, below).

The atod_test project builds one executable: indexed_atod_test.

Opening, Building and Uploading the Project Files

For information on opening the project from within Eclipse, please see Importing the EMAC OE SDK Projects with Eclipse. Then, follow Using the EMAC OE SDK Projects with Eclipse for information on how to build, upload and execute the example.


Alternatively, the Makefile can be used with the make command from the commandline to build and upload the example. For more information on this method, please see Using EMAC OE SDK Example Projects.

Usage and Behavior

Hardware Requirements

The atod_test project requires a device with indexed atod functionality, ie: A SoM-9260, a SoM-9G20 or an IPAC-9302.
You can also use a SoM-150ES carrier (using the mcp3208 external AtoD device through /dev/mcp3208-gpio). This interface uses the EMAC ioex class to provide a GPIO-like device where each channel can be read directly (see also the egpc example project).

Using atod_test

indexed_atod_test DEVICE CHANNELS

Where DEVICE is the path to the device to read and CHANNELS is the number of channels to read.

Usage Example

root@som9g20:/tmp# ./indexed_atod_test /dev/indexed_atod 4
[0] = 19
[1] = 76
[2] = 18
[3] = 22

Summary

The atod_test C example project demonstrates reading the channels of an indexed atod device.