Difference between revisions of "Example egpc"
(→What it does) |
|||
| Line 1: | Line 1: | ||
| − | {{todo|InProgress(11.13.13-14:31->JG+)|Jgreene|project=oe 4,oe 5, | + | {{todo|InProgress(11.13.13-14:31->JG+)|Jgreene|project=oe 4,oe 5,jg,md,InProgress}} |
<big>This procedure provides an overview of how to compile and run the ''egpc'' C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.</big> | <big>This procedure provides an overview of how to compile and run the ''egpc'' C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.</big> | ||
Revision as of 09:00, 27 November 2013
This procedure provides an overview of how to compile and run the egpc C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.
Contents
1. Open the C/C++ editing perspective
2. Open the egpc project
3. Build, upload and run
What it does
egpc reads/writes/configures the specified gpio character device using the specified arguments.
usage:
egpc device d/c/i (writearg)
ie: ./egpc /dev/egpio1 d
Enter egpc -h for details.
From the comments in egpc.c
Program for reading/writing/configuring gpio character devices. Code here based upon the egp, the gpio program for the SoM-5282M/SoM-100ES. See the usage message for information on how to use this application.
