Difference between revisions of "System Logging"
m (Saving to keep from losing it, while going for lunch.) |
m (Checking page in while switching tasks.) |
||
Line 246: | Line 246: | ||
===Writing to Syslog from Programs and Scripts=== | ===Writing to Syslog from Programs and Scripts=== | ||
− | As mentioned previously, many languages support writing to the Linux system logging | + | As mentioned previously, many languages support writing to the Linux system logging daemon. There are many handy libraries and functions which provide this capability. Some of the most commonly used ones are shown here. |
====Shell Utility: <code>logger</code>==== | ====Shell Utility: <code>logger</code>==== | ||
− | Whether you are writing a shell script, or simply | + | Whether you are writing a shell script, or simply wishing to enter something into the system logs from the commandline, the <code>logger</code> utility will give you the capability you need. This simple command takes a few options, but it can also be run with the only argument being the message to log. |
=====Arguments to <code>logger</code>===== | =====Arguments to <code>logger</code>===== | ||
Line 255: | Line 255: | ||
The following options are available for <code>logger</code>: | The following options are available for <code>logger</code>: | ||
;<code>-t</code> ''TAG'' | ;<code>-t</code> ''TAG'' | ||
− | : Takes a ''TAG'' as an argument. This option specifies a tag to | + | : Takes a ''TAG'' as an argument. This option specifies a tag to use for labeling the message. Tags are useful for sorting through logs later on. |
;<code>-p</code> ''Priority'' | ;<code>-p</code> ''Priority'' | ||
: Takes a ''Priority'' as an argument. The priority may be specified as just a numeric priority level, identifying the severity of the message, or it can be specified as a tuple containing a facility name and a priority level, delimited by a dot (<code>.</code>). If no facility is specified, the facility defaults to, <code>user</code>. The severity levels are specified in [[System_Logging#Severity | severity]] above. The facility names are specified in [[System_Logging#Facilities | facilities]] above. | : Takes a ''Priority'' as an argument. The priority may be specified as just a numeric priority level, identifying the severity of the message, or it can be specified as a tuple containing a facility name and a priority level, delimited by a dot (<code>.</code>). If no facility is specified, the facility defaults to, <code>user</code>. The severity levels are specified in [[System_Logging#Severity | severity]] above. The facility names are specified in [[System_Logging#Facilities | facilities]] above. | ||
Line 306: | Line 306: | ||
====Writing to Syslog from a C Program==== | ====Writing to Syslog from a C Program==== | ||
− | There is a standard C function call on Linux for writing to the system logger. | + | There is a standard C function call on Linux for writing to the system logger. This function, <code>syslog()</code>, uses a persistent connection to the log facility which can be opened and closed using the associated <code>openlog()</code> and <code>closelog()</code> functions. However, if the <code>syslog()</code> function is called without first calling <code>openlog()</code>, the <code>syslog()</code> function will open the connection implicitly. |
+ | |||
+ | =====Essential Elements===== | ||
+ | The header file required for these functions is <code>syslog.h</code>. | ||
+ | |||
+ | The relevant functions are: | ||
+ | <br /><br /> | ||
+ | {{ note |<code>'''void openlog( const char * ident, int option, int facility )'''</code> | ||
+ | : <br />The <code>openlog()</code> function is used to (optionally) open a connection to the log daemon before writing log messages. If the <code>openlog()</code> function is called, the <code>closelog()</code> function must also be called before exiting. <br /><br />The following parameters are accepted by this function:<br /><br /> | ||
+ | :;<code>''ident''</code> | ||
+ | :: The <code>ident</code> parameter is an identification string to use for log messages. This is just like the tag option to the <code>logger</code> command available from the shell. If this parameter is <code>null</code>, the identification string defaults to the name of the process sending the messages. | ||
+ | :;<code>''option''</code> | ||
+ | :: The <code>option</code> parameter is a bit string which accepts the following single bit masks: | ||
+ | ::;<code>'''LOG_PERROR'''</code> | ||
+ | ::: If on, any log messages sent will also go to the <code>stderr</code> stream associated with the current process. | ||
+ | ::;<code>''LOG_CONS''</code> | ||
+ | ::: This useful flag causes any messages which were unable to be sent to the system logger (due to any kind of failure) will be sent to the system console instead. | ||
+ | ::;<code>''LOG_PID''</code> | ||
+ | ::: When on, the process ID of the current process will be printed with each log message. This is especially useful for programs which call <code>fork()</code> at some point in their lifetime. | ||
+ | ::;<code>''LOG_NDELAY''</code> | ||
+ | ::: This option forces the connection to be established immediately, rather than deferred to a later point (such as at the beginning of the first call to the <code>syslog()</code> function.) | ||
+ | :;<code>''facility''</code> | ||
+ | :: This is the facility to which the log messages should be directed. The available facilities were described earlier in this document; see [[System_Logging#Facilities | facilities]]. | ||
+ | }} | ||
+ | |||
Revision as of 17:19, 17 November 2015
This document provides an overview of how system logging works in Linux, and provides guidance on how to work with and configure system logging so that it meets your needs.
Contents
Background
System Logging services exist on Linux systems to provide a central logging facility. This central logging service can store logged messages in files on the local machine, can forward the log messages to a remote machine for remote storage and display, and can output the log messages as they arrive to a terminal.
The syslog facility is standardized by POSIX and, as a result, there is a great deal of support for the syslog facility. There are APIs for logging to the syslog facility from C, C++, Python, Java, PHP, Perl, Bash, the commandline, and many other languages. Using the commandline tool, it is even possible to write to the syslog facility from the commandline.
Facilities
In syslog terminology, a facility is a category for log messages. There are generally at least seven standard syslog facilities on any Linux syslog system. The following list shows the standard seven as well as some which are rarely used anymore (especially in embedded systems). The name of the facility is followed, in parenthesis, by the integer facility code associated with the facility, which is then followed by a description of the facility. The ones you should not expect to find on an embedded system are demarcated with an asterisk (*):
- kern(0)
- Kernel messages
- user(1)
- User Level Messages
- mail(2)*
- Mail System Messages
- daemon(3)
- System Daemon Messages
- auth(4)
- Security/Authentication Messages
- syslog(5)
- Internally Generated Syslog Messages
- lpr(6)*
- Line Printer Subsystem Messages
- news(7)*
- Network News Subsystem Messages
- uucp(8)*
- UUCP Subsystem Messages
- cron(15)
- Cron Scheduling Daemon Messages
- local(16-23)
- Locally Defined Usage, Messages
Severity
Each of these facilities accepts messages which will have an associated severity level. The severity level is important for filtering messages. The following list shows the eight available severity levels:
- emerg(0)
- Emergency - System is now unusable
- alert(1)
- Alert - Immediate Attention is Required
- crit(2)
- Critical - The System is in a Critical Condition, which may be caused by a failure in the primary appliction.
- err(3)
- Error - An Error has occurred.
- warning(4)
- Warning - An unusual, but not erroneous, event has occurred. For example: "Warning: Could not check for updates."
- notice(5)
- Notice - Uncommon but generally expected messages. For example: "Network Interface eth0 received IP address of 192.168.0.100 from DHCP server."
- info(6)
- Informational - Common, expected events generate these messages. For example: "Application XYZ started successfully."
- debug(7)
- Debug - Debugging messages belong at this level.
Storage
By default, the log messages on an EMAC OE Linux machine are stored in a local ramdisk. This type of storage prevents excessive wear of the flash, and works when all of the flash partitions are mounted read-only. However, by storing the messages in a ramdisk, all messages in the ramdisk will be lost as soon as the machine resets, powers off, or reboots for any reason.
Alternate Logging Locations
The syslog server can be configured to log to alternate locations. This is useful for configuring the server to log to persistent storage, such as a writable partition on the local flash or a partition on an SD card. The alternate logging locations can even be remote machines.
Remote Logging
The /var/log
directory is the standard location for holding local log messages. This directory usually contains either one file per facility or one directory per facility. If a facility has a directory, it may contain different files which all belong to the facility. The system logging facility directs messages to these files based on rules set in its configuration. The configured rules use the facility level and the severity level to direct the syslogger's filters regarding to which file to send any particular message. There are several different implementations of the syslogger facility, each with its own configuration mechanisms and level of flexibility.
The system logger is also able to send messages to a remote syslog server over a network. The remote syslog server will be able to filter the messages using all of the same criteria as above, but also by source. A remote syslog server configuration can be very useful for remotely debugging deployed machines. While an embedded machine stores its logs on a ramdisk, the remote machine may store them to a traditional hard disk or SSD, allowing them to be preserved through power cycles.
The remote syslog server can be on any normal server, it can be on a developer's desktop, or it can be on another embedded machine. Sending debug messages to a central syslog server ensures the debug messages will be available even if the machine of interest freezes or resets. The use of a remote syslog server can also assist with looking for trends and outliers among a group of deployed machines since the log messages for the entire group of machines can be located in one place.
Log Rotation
Syslog servers incorporate a feature called log rotation. Log rotation is a process which prevents log files from growing beyond a certain size while preserving log messages for later reference. The syslog server (or logrotate system) can be configured with a maximum file size and a maximum number of rotated logs to keep. When the maximum file size is reached, the file will be "rotated." When the maximum number of logs to keep is exceeded, the oldest one will be deleted. There is more information on how this process works below.
General Information
Your Daemons
When developing a software daemon, syslog is a very useful tool for monitoring and debugging your software. The syslog daemon is highly configurable, allowing filters to be altered to suit the current needs of a developer without recompiling software. This capability allows developers to deploy software which sends ample debugging messages to the syslog server without fear of overwhelming the system with debug messages. Using the eight local
facilities syslog recognizes, these debug messages can be categorized by developers to allow them to selectively choose the amount of log information they store from each of up to eight different subsystems. This is extremely useful when a system in the field is experiencing intermittent issues. By enabling maximum debugging output for only the subsystem responsible for the feature which is misbehaving, the developers have the greatest chance of seeing the messages they need to diagnose the source of the problem without overwhelming the system (or the storage) with messages. If eight facilities is not enough, the developers can always repurpose dedicated facilities which aren't in use by their intended systems. For instance, the line printing facility is rarely used on an embedded system, and may be safely repurposed by developers.
Web Development
When providing a web interface for an embedded system, the syslog daemon is often the only way to debug a variety of issues with the web server. When links don't work, certain browsers have issues, pages load slowly, or any of a myriad of other issues crop up, the logs are generally the first place people turn for answers. This is just as true on embedded systems as it is on any large scale web server or server farm. On embedded systems, however, the configuration for the logging system may need to be altered due to the volatile nature of the logs in the default configuration. This document provides information on how to solve the issues which may be encountered as a result of this.
Machine Startup
When configuring a machine to start up all the necessary services in the correct sequential order, when the machine is powered on, the syslog server is very helpful in performing the following tasks:
- Ensuring that process X really did start before process Y.
- Checking to see if any errors or warnings were reported by processes starting up.
- Ensuring that processes really did start, at all.
- Checking to see what configuration was chosen by a process which is capable of choosing its configuration dynamically.
- Checking the messages reported by device drivers as they start up.
- Determining the IP address used by a system which gets its network configuration via DHCP.
Startup scripts log their activity to the syslog daemon. Any daemon process launched by these startup scripts should also log startup messages to indicate that they're starting, how they're configured, and that they've finished the startup sequence and are now running. The system logs enable the engineer to assure that a machine has started as intended.
Malfunctioning Systems
When a proven system is malfunctioning, the system logs can be essential in determining the cause of the malfunction. In cases such as this, the system logs are helpful for:
- Looking to see who logged into a machine, and when.
- Looking for signs of attacks directed at the machine.
- Looking for signs of failing hardware.
- Looking for error and warning messages coming from system processes, daemons, and/or your custom application.
Without these logs, it may be nearly impossible to diagnose these malfunctions.
In Brief
This guide provides enough background information to enable you to handle any of the situations described above. Using the information contain herein, you will be able to approach any of the above listed problems with the tools you need to solve the problems you are facing.
NOTE |
To make best use of the log files, a working knowledge of grep is highly beneficial. Experience with crafting and using regular expressions with grep prior to writing system logging messages in your application and init scripts can make the diagnosis process simpler, since a little forethought into a syntax for the messages can make filtering the messages through grep much easier to accomplish correctly. |
System Logging
EMAC OE Linux 5.0 uses Busybox's syslog daemon, syslogd
, by default. However, the syslog-ng
package can be installed to provide a much more capable system logging daemon, when needed.
Default Syslog Daemon
The Busybox syslog daemon is used by default.
About
The standard syslog daemon supports the following configuration capabilities:
- Maximum size limit for log files.
- Maximum number of log files to keep, when rotated.
- Minimum priority level for messages to log.
- Duplicate dropping (not usually recommended).
- Log to remote and local files simultaneously, just to local files, or to a memory buffer which needs to be read by a special utility.
Working With
The Busybox syslog daemon is configured, by default, to log to files in the RAMDISK mounted on /var/log/
. The files contained in this directory will be capped in size and rotated according to the configuration of the syslog daemon.
The Busybox syslog daemon is configured with the file, /etc/syslog-startup.conf
. This file is used for backwards compatibility, because the Busybox syslog daemon recently began reading the /etc/syslog.conf
file. The /etc/syslog-startup.conf
comes from OE rather than from Busybox.
The standard /etc/syslog-startup.conf
configuration is shown below:
# This configuration file is used by the busybox syslog init script,
# /etc/init.d/syslog[.busybox] to set syslog configuration at start time.
DESTINATION=file # log destinations (buffer file remote)
LOGFILE=/var/log/messages # where to log (file)
REMOTE=loghost:514 # where to log (syslog remote)
REDUCE=no # reduce-size logging
DROPDUPLICATES=no # whether to drop duplicate log entries
#ROTATESIZE=0 # rotate log if grown beyond X [kByte]
#ROTATEGENS=3 # keep X generations of rotated logs
BUFFERSIZE=64 # size of circular buffer [kByte]
FOREGROUND=no # run in foreground (don't use!)
#LOGLEVEL=5 # local log level (between 1 and 8)
- DESTINATION
- This configures where the syslog messages will be sent.
- buffer
- The
buffer
option will cause the messages to be stored in an internal circular buffer, in RAM. This buffer must be read withlogread
. - file
- The
file
option will cause the messages to be stored in a file in the location specified by theLOGFILE
parameter, listed below. - remote
- The
remote
option will cause syslog messages to be sent to a remote syslog daemon.
- LOGFILE
- The
LOGFILE
parameter specifies the location of the logfile which should be used with thefile
destination. - REMOTE
- The
REMOTE
parameter specifies the host and port to which to send remote log messages. The two part format for this variable provides the destination host followed by the destination port number, with a colon as the delimiter between the two. The destination may be specified as a hostname, or as an IP address. The destination port number should be the port on which the remote syslog server listens.
NOTE |
If the destination is specified as a hostname, it is best to create an entry in /etc/hosts for the hostname so that it will resolve to an IP address even if there is a problem with the DNS servers. |
- REDUCE
- The
REDUCE
option takes ayes
orno
argument. When set toyes
, the syslog server will neglect to log the hostname, facility, and severity level with each log message. This is only recommended for severely resource constrained systems, since the facility and severity level are often used for filtering messages throughgrep
. - DROPDUPLICATES
- The
DROPDUPLICATES
option takes ayes
orno
argument. When set toyes
, the syslog server will ignore messages which duplicate the preceeding message. This can be useful when an errant process keeps sending the same message over and over again, and swamps out the other messages as a result (due to the maximum size setting for the log files). It is best to keep this option off unless it is absolutely needed for a situation like the one just described, because having it turned on can cause other problems to be hidden (generally leading to frustration and/or embarrassment). - ROTATESIZE
- The
ROTATESIZE
option takes a numeric argument. This argument is the maximum desired size for a log file, specified in kibibytes. When a log file has grown to the point where it exceeds this high water mark, it will be rotated. - ROTATEGENS
- The
ROTATEGENS
option takes a numeric argument. This argument specifies the number of older generations of log files to keep in existence. By generations, it means the number of log files which have already been renamed with a sequencing number as a postfix. See the note below for more information.
NOTE |
Logfile rotation is a process which renames log files sequentially, to preserve older log messages while keeping incoming messages writing to the same location. For instance, for the /var/log/messages file, this might look like:
root @ som9x25 : /var/log # mv messages messages.0 root @ som9x25 : /var/log # touch messages If there already is a root @ som9x25 : /var/log # rm -f messages.2 root @ som9x25 : /var/log # mv messages.1 messages.2 root @ som9x25 : /var/log # mv messages.0 messages.1 root @ som9x25 : /var/log # mv messages messages.0 root @ som9x25 : /var/log # touch messages |
- BUFFERSIZE
- The
BUFFERSIZE
option takes a numeric argument. This argument specifies the size of the internal circular buffer to use for holding log messages in an internal RAM buffer. This argument only matters when theDESTINATION
is set tobuffer
. The size is specified in kibibytes. - FOREGROUND
- The
FOREGROUND
option takes ayes
orno
argument. This argument specifies whether thesyslogd
process should run in the foreground or as a daemon. It is strongly recommended for this option to always be set to,no
, to runsyslogd
as a daemon. This option mostly exists for the developers of Busybox to debug theirsyslogd
implementation. - LOGLEVEL
- The
LOGLEVEL
option takes a numeric argument. This argument specifies the highest numbered severity level which should be logged (see severity above). By default, this is set such that messages with a severity of notice, or more severe, will be logged.
Optional syslog-ng
With logrotate
The optional syslog-ng
and logrotate
option provides everything that's provided by the Busybox syslog daemon, plus:
- Sophisticated filters for directing log traffic.
- The ability to act as a central syslog server which receives log messages from remote syslog machines.
- Enhanced control over the destination(s) for log messages, allowing (for example) messages to be logged to a local RAMDISK, a local SD card (if available), and to a remote syslog server (if available) simultaneously.
- The ability to configure logrotate to automatically e-mail log files when they're rotated.
- Same syslog server software is readily available for Linux desktops and servers.
As can be expected, the potential drawback of syslog-ng
is the steeper learning curve required to make use of its more sophisticated features. However, those already familiar with syslog-ng
will be able to benefit from its extra sophistication immediately.
The official manual page for syslog-ng
has more details: http://www.syslog.org/syslog-ng/v1/
Please contact EMAC for details on how to install syslog-ng
and logrotate
if you have trouble finding and installing them with opkg
.
Examples
Evaluating Log Messages
Log messages are stored in /var/log/
by default. This directory contains at least one log file, messages
.
Writing to Syslog from Programs and Scripts
As mentioned previously, many languages support writing to the Linux system logging daemon. There are many handy libraries and functions which provide this capability. Some of the most commonly used ones are shown here.
Shell Utility: logger
Whether you are writing a shell script, or simply wishing to enter something into the system logs from the commandline, the logger
utility will give you the capability you need. This simple command takes a few options, but it can also be run with the only argument being the message to log.
Arguments to logger
The following options are available for logger
:
-t
TAG- Takes a TAG as an argument. This option specifies a tag to use for labeling the message. Tags are useful for sorting through logs later on.
-p
Priority- Takes a Priority as an argument. The priority may be specified as just a numeric priority level, identifying the severity of the message, or it can be specified as a tuple containing a facility name and a priority level, delimited by a dot (
.
). If no facility is specified, the facility defaults to,user
. The severity levels are specified in severity above. The facility names are specified in facilities above. -s
- This option sets a boolean which enables logging messages to
stdout
as well as to the system logger. This is especially useful in interactive shell scripts, since it allows the developer to use one function to output a message to the screen and to the system logs simultaneously.
Examples of Using logger
To send a message to the system log as simply as possible:
root
@
som9x25
:
~
#
logger "Default settings message example"
root
@
som9x25
:
~
#
tail -n 1 /var/log/messages
To send a message to the system log with severity 3 (err):
root
@
som9x25
:
~
#
logger -p 3 "This is an example error message"
root
@
som9x25
:
~
#
tail -n 1 /var/log/messages
Nov 17 19:22:06 ipac9x25 user.err root: This is an example error message
To send a message with the facility, local5
, and the severity 4 (warn):
root
@
som9x25
:
~
#
logger -p local5.4 "This is a local5 facility warning message example."
root
@
som9x25
:
~
#
tail -n 1 /var/log/messages
To add a tag (highly recommended) to the above, use -t
. Here, we use the tag, EXAMPLE
:
root
@
som9x25
:
~
#
logger -t EXAMPLE -p local5.4 "This is a local5 facility warning message example."
root
@
som9x25
:
~
#
tail -n 1 /var/log/messages
Nov 17 19:25:19 ipac9x25 local5.warn EXAMPLE: This is a local5 facility warning message example.
Notice that the username (root
) was replaced by the tag (EXAMPLE
). When using tags in a script or program, it is best to come up with a unique tag and create a function for sending messages to the system log with this tag. That way, you can easily find all messages from just your program/script. If you have a complex program or set of scripts to debug, you could use multiple tags, but this will be more difficult to search for unless you use the optional syslog-ng
to redirect the messages from your software to distinct files.
In an interactive script, you might use logger
like this:
root
@
som9x25
:
~
#
logger -t EXAMPLE -p local3.6 -s "Successfully wrote new configuration file."
EXAMPLE: Successfully wrote new configuration file.
root
@
som9x25
:
~
#
tail -n 1 /var/log/messages
Nov 17 19:25:19 ipac9x25 local5.warn EXAMPLE: This is a local5 facility warning message example.
Notice that the message isn't visible in the system log? This is because the syslogd
daemon on this machine is only configured to log messages which have a severity of 5 or lower. We might modify the example so that it will be logged, like this:
root
@
som9x25
:
~
#
logger -t EXAMPLE -p local3.5 -s "Successfully wrote new configuration file."
EXAMPLE: Successfully wrote new configuration file.
root
@
som9x25
:
~
#
tail -n 1 /var/log/messages
Nov 17 19:31:37 ipac9x25 local3.notice EXAMPLE: Successfully wrote new configuration file.
Now the message has been saved to the system logs as well as displayed on stdout
.
Writing to Syslog from a C Program
There is a standard C function call on Linux for writing to the system logger. This function, syslog()
, uses a persistent connection to the log facility which can be opened and closed using the associated openlog()
and closelog()
functions. However, if the syslog()
function is called without first calling openlog()
, the syslog()
function will open the connection implicitly.
Essential Elements
The header file required for these functions is syslog.h
.
The relevant functions are:
NOTE |
void openlog( const char * ident, int option, int facility )
|