Difference between revisions of "Wifi and Bluetooth on the DEV-IOT6U"
(Page creation) |
|||
| Line 16: | Line 16: | ||
On the DEV-IOT6U, bluetooth is disabled by default. Enable it by: | On the DEV-IOT6U, bluetooth is disabled by default. Enable it by: | ||
<syntaxhighlight>gpioset gpiochip0 5=1</syntaxhighlight> | <syntaxhighlight>gpioset gpiochip0 5=1</syntaxhighlight> | ||
| − | + | <syntaxhighlight>hciattach /dev/ttymxc3 -t 30 bcm43xx 115200 noflow</syntaxhighlight> | |
| − | <syntaxhighlight>hciattach /dev/ttymxc3 -t 30 bcm43xx | ||
Use '''hciconfig''' to check that hci0 device interface is enabled, and use <syntaxhighlight>hciconfig hci0 up</syntaxhighlight> to open and initialize the HCI device. See [https://linux.die.net/man/8/hciconfig hciconfig manual] for more information on configuring your Bluetooth device.<br> | Use '''hciconfig''' to check that hci0 device interface is enabled, and use <syntaxhighlight>hciconfig hci0 up</syntaxhighlight> to open and initialize the HCI device. See [https://linux.die.net/man/8/hciconfig hciconfig manual] for more information on configuring your Bluetooth device.<br> | ||
<br> | <br> | ||
Revision as of 16:38, 28 September 2020
Wifi
Most of the information regarding Wifi can be found in the Wifi wiki page.
For this kit, the setup should already be preinstalled, and you can skip to Wifi: Wireless Networking
If when attempting to establish a connection in step 6 with:
/etc/init.d/wpa_supplicant start
the command seems to do nothing, attempt to restart the connection with:
/etc/init.d/wpa_supplicant restart
Bluetooth
On the DEV-IOT6U, bluetooth is disabled by default. Enable it by:
gpioset gpiochip0 5=1hciattach /dev/ttymxc3 -t 30 bcm43xx 115200 noflowUse hciconfig to check that hci0 device interface is enabled, and use
hciconfig hci0 up to open and initialize the HCI device. See hciconfig manual for more information on configuring your Bluetooth device.
From there
