Difference between revisions of "Example io demo"
| Line 5: | Line 5: | ||
This procedure provides an overview of how to open, build and run the '''io_demo''' C example project using the Eclipse IDE. | This procedure provides an overview of how to open, build and run the '''io_demo''' C example project using the Eclipse IDE. | ||
| − | + | foofoofo | |
| − | |||
| − | |||
Revision as of 10:16, 27 November 2013
This is a guide to the io demo C example project included in the EMAC OE SDK.
You want to send some data to ths
This procedure provides an overview of how to open, build and run the io_demo C example project using the Eclipse IDE. foofoofo
Contents
Opening, Building and Uploading the Project Files
1. Open the C/C++ editing perspective.
stub
2. Open the io demo project files.
stub
3. Build the io demo project.
stub
4. Upload the io demo binary to the target machine.
stub
Description, Usage and Expected Behaviour
This is a demo program illustrating how to access different SOM-150ES carrier board io. To use this program you will need a SOM-150ES carrier board.
500px
SOM-150ES carrier board
Usage for io_demo
io_demo
Running the program brings up a menu of demos.
i2c menu
Press a,c,i or r to run a demo. Press x to exit.
A/D Demo
File:Io demo terminal session sample 0.png
Count Demo
Refer to the SOM-150ES carrier board surface mount LEDs LD1-LD8 for output.
The board counts from 0 to 15 in binary, reflecting the steps of this operation in the LEDs. When it's finished LD1 and LD6 are lit.
Input to Output Demo
Refer to the SOM-150ES carrier board surface mount LEDs LD1-LD8 for output.
The board lights all 8 LEDs.
Ring Demo
Refer to the SOM-150ES carrier board surface mount LEDs LD1-LD8 for output.
The board lights the LEDs in numeric sequence, 1-8, then repeats; looping until a key is pressed.
