Difference between revisions of "Installing TFTP server"
m (Added note and marked Buggy.) |
(→Installing tftpd) |
||
Line 39: | Line 39: | ||
The TFTP server is then ready to send/recieve files from /tftpboot. | The TFTP server is then ready to send/recieve files from /tftpboot. | ||
− | {{ imbox | type=notice | text= | + | {{ imbox | type=notice | text=The directory used for the TFTP server can be changed using the server_args variable in /etc/xinet.d/tftp file. }} |
=== Installing a TFTP server on Windows === | === Installing a TFTP server on Windows === |
Revision as of 11:25, 16 December 2013
Contents
Background Information
The Trivial File Transfer Protocal, or TFTP, is used to transfer files from machine to machine with less overhead than other protocols. For more information about TFTP, see the following page: http://en.wikipedia.org/wiki/Trivial_File_Transfer_Protocol
Nearly all of the EMAC ARM based systems require a TFTP server to transfer the Linux kernel and file system to the board from a host PC. The boot loader will connect to the server to retrieve specific files and relocate them to SDRAM, which enables them to be programmed onto the target's flash.
Installing a TFTP server on Ubuntu
There are several TFTP server alternatives in Ubuntu. The tftpd or tftpd-hpa packages are recommended for installation.
Installing tftpd
NOTE: This doesn't say anything about distribution (which it must), doesn't explain anything about the permissions, and looks like it was written hastily.
To install the tftpd package, run the following:
sudo apt-get install tftpd
To configure the the TFTP server, create /etc/xinetd.d/tftp
with the following contents:
service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no }
Run the following to create the TFTP server's base directory:
sudo mkdir /tftpboot sudo chmod -R 777 tftpboot sudo chown -R nobody /tftpboot
Once the configuration is complete the xinetd start should be restarted to enable the server:
sudo /etc/init.d/xinetd restart
The TFTP server is then ready to send/recieve files from /tftpboot.
The directory used for the TFTP server can be changed using the server_args variable in /etc/xinet.d/tftp file. |
Installing a TFTP server on Windows
This is not an acceptable explanation.
For Window's based systems, EMAC recommends the Tftpd32 server. The installation procedure is typical and should be self explanatory.