Difference between revisions of "Installing EMAC OE 5.0 SDK"

Revision as of 21:38, 1 October 2013

Before beginning installation of the SDK, it is important to prepare the development system with the tools necessary to get the job done.

Download the SDK. The latest version can be found on the public EMAC FTP site. Be sure to download the SDK that matches the architecture of your target system. Contact EMAC if unsure.
Change to the directory where the SDK was downloaded from the command line:
```
 developer@ldc:~$ cd /download/directory
```
Run SDK installer script:
```
 developer@ldc:~$ ./SDK_NAME.sh
```
The installer will start. It is recommended to select the default target directory for the SDK:
```
 /opt/emac/5.0
```
Press enter to proceed.
Enter the development user's password if prompted.

Status text will appear:

Extracting SDK...done
Setting it up...done
SDK has been successfully set up and is ready to be used.

@@ Line 1: / Line 1: @@
+{{todo|Make sure there is an OE 4 and OE 5 version|Michael Gloff|project=oe 4,oe 5,mg}}
 ==Prerequisites==
 Before beginning installation of the SDK, it is important to prepare the development system with the tools necessary to get the job done.