Example atod
This procedure provides an overview of how to compile and run the atod_test C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.
1. Open the C/C++ editing perspective. From the Eclipse menubar, select Window->Open Perspective->Other... Select C/C++ and click OK.
2. Open the atod_test project.
OPEN THE PROJECT IN ECLIPSE
The atod_test example project source can be found in the projects/ subdirectory of the EMAC OE SDK root directory. The full path to the source is as follows:
/path/to/sdk/EMAC-OE-arm-linux-gnueabi-SDK_4.0/projects/atod_test/
COMPILE IT
RUN IT
WHAT IT DOES
The atod test reads all channels of an indexed atod device on an EMAC OE Linux operating system.
