Example i2c test

From wiki.emacinc.com
Revision as of 13:06, 14 November 2013 by Jgreene (talk | contribs) (Created page with "{{todo|InProgress(11.14.13-12:14->JG+)|Jgreene|project=oe 4,oe 5,ky,md,InProgress}} <big>This procedure provides an overview of how to compile and run the ''i2c_test'' C examp...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
TODO: {{#todo:InProgress(11.14.13-12:14->JG+)|Jgreene|oe 4,oe 5,ky,md,InProgress}}

This procedure provides an overview of how to compile and run the i2c_test C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.

1. Open the C/C++ editing perspective

2. Open the egpc project

3. Build, upload and run



What it does

This is an example test interface for reading/writing to the Linux I2C device interface. It is only relevant if the I2C device interface is enabled and an external I2C device is connected to the bus. See comments in i2c_test.c for details.

Usage for i2c_test

i2c_test

ie: ./i2c_test A menu will appear.

i2c menu

Retrieved from "https://wiki.emacinc.com/index.php?title=Example_i2c_test&oldid=1351"