Example atod

TODO: {{#todo:Review(11.13.13-12:59->JG+)|Jgreene|oe 4,oe 5,jg,md,Review}}

This is a guide to the atod_test C example project included in the EMAC OE SDK.

This application reads all channels of an indexed atod device (see hardware requirements, below) on EMAC OE Linux.

The atod_test project builds one executable: indexed_atod_test.

Opening, Building and Uploading the Project Files

1. Open the C/C++ editing perspective.

stub

2. Open the project files.

stub

3. Build the project.

stub

4. Upload the executables to the target system.

stub

Usage and Behavior

Hardware Requirements

Usage:
indexed_atod_test DEVICE CHANNELS
i.e. : ./indexed_atod_test /dev/indexed_atod 4

From the comments in index_atod_test.c

   Example application for reading all channels of an indexed atod device
   on EMAC OE Linux. Examples of this type of device are the processor
   AtoDs on the SoM-9260/9G20 and the IPAC-9302 and the mcp3208 external
   AtoD devices on the SoM-150ES carrier (through the /dev/mcp3208-gpio
   device. This interface uses the EMAC ioex class to provide a GPIO-like
   device where each channel can be read directly.(see also the egpc project).