Configuring EMAC OE 4.0 SDK

From wiki.emacinc.com
Revision as of 10:08, 17 October 2013 by Mgloff (talk | contribs)
Jump to: navigation, search
TODO: {{#todo:Fix and finish|Michael Gloff|oe 4,Revise, mg}}

SDK Configuration Script

Before compiling source code on the development machine for the target machine, the toolchain libraries for the target machine must be specified.

  1. Open a terminal window

  2. Navigate to the SDK directory.

    developer@ldc:~$ cd /path/to/sdk/EMAC-OE-arm-linux-gnueabi-SDK_XX.YY/
    
  3. Run the script using the command shown below to produce a menu as shown in Figure 1.

    developer@ldc:~$ ./setmachine.sh
    
  4. Select the appropriate target machine type


Emac oe sdk setup-2.png

Remote Upload Set-up

The global.properties file contains the fields necessary to contact and connect to the target board as well as the architecture specific build paths.

  1. Obtain the target machine's current IP address by issuing the following command from a shell on the target system:

    root@emac-oe:~# /sbin/ifconfig eth0 | grep inet
    
  2. Navigate to the projects directory within the SDK.

    developer@ldc:~$ cd /path/to/sdk/EMAC-OE-arm-linux-gnueabi-SDK_XX.YY/projects
    
  3. Open the global.properties file with a text editor such as vi.

  4. The global.properties parameters are shown in Table 1 below.

    Configuration variable Description
    SDKBASE The base directory for the SDK.
    CC, CXX Exectuable binaries to use for compiling for the C and C++ compiler, respectively.
    LD_LIBRARY_PATH The path the linker should use to search for shared library files.
    CFLAGS The flags passed to the compiler to specify target processor architecture, debugging flags, etc.
    OFLAGS The flags passed to the compiler to specify optimization options to use.
    TARGET_IP The IP Address of the target machine (needed for uploading the compiled binary to the target machine).
    LOGIN The user name to use for logging into the target machine.
    PASSWORD The password to use for logging into the target machine.*
    WPUT The location of the wput command, along with options to pass to wput.


    For more information on how to connect to the remote system, see the initial connections of the Getting Started Guide.


See Also