Difference between revisions of "CutiPy-Installing MicroPython Firmware"

From wiki.emacinc.com
Jump to: navigation, search
(Added link to EMAC public MicroPython releases)
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
  
 +
This tutorial will walk you through installing/updating MicroPython on your CutiPy device. Instuctions are given for both Windows and Linux users.
 
=== Necessary equipment ===
 
=== Necessary equipment ===
  
Line 7: Line 8:
 
* A pair of needle nose pliers for wire jumper re-positioning  
 
* A pair of needle nose pliers for wire jumper re-positioning  
 
* A personal computer (Windows or Linux)
 
* A personal computer (Windows or Linux)
* EMAC's latest MicroPython firmware release
+
* [http://git.emacinc.com/micropython-public/micropython/-/releases EMAC's latest MicroPython firmware release]
 
</cl>
 
</cl>
  
Line 94: Line 95:
 
{{clo}}
 
{{clo}}
  
C:\Users\MyUser\Desktop\dfu-util-0.9-win64>duf-util --alt 0 -D firmware.dfu
+
C:\Users\MyUser\Desktop\dfu-util-0.9-win64>dfu-util --alt 0 -D firmware.dfu
  
 
{{clos}}
 
{{clos}}
Line 143: Line 144:
  
  
* Safely eject and disconnect the USB, shift the JB2 pin jumper back to the original location (BT0 and FLS should now be joined). Now reconnnect the MicroUSB cable.
+
* Safely eject and disconnect the USB (Remove power), shift the JB2 pin jumper back to the original location (BT0 and FLS should now be joined). Now reconnnect the MicroUSB cable.
  
 
Installation is now complete complete.
 
Installation is now complete complete.
Line 185: Line 186:
 
* Hold down PB1.
 
* Hold down PB1.
 
* While still holding down PB1, press and release the reset button PB5.
 
* While still holding down PB1, press and release the reset button PB5.
* The LD2 and LD3 will then flash, cycling through various lighting combinations corresponding to different options. Both lit corresponds to factory reset.
+
* The LD2 and LD3 will then flash, cycling through various lighting combinations corresponding to different options. Both lit corresponds to the factory reset option.
 
* Keep holding down PB1, when both LEDs are lit, release PB1 to select the factory reset option.
 
* Keep holding down PB1, when both LEDs are lit, release PB1 to select the factory reset option.
 
* Both LEDs should quickly flash 4 times, a third LED (LD1) will turn on.
 
* Both LEDs should quickly flash 4 times, a third LED (LD1) will turn on.
Line 197: Line 198:
 
https://github.com/micropython/micropython/wiki/Pyboard-Firmware-Update<br />
 
https://github.com/micropython/micropython/wiki/Pyboard-Firmware-Update<br />
 
https://docs.micropython.org/en/latest/pyboard/tutorial/reset.html#factory-reset-the-filesystem
 
https://docs.micropython.org/en/latest/pyboard/tutorial/reset.html#factory-reset-the-filesystem
 +
 +
{{:Templateimpl:using | initials=BS | title=Pages with Related Content| desc=Basic tutorial for using the EMAC OE SDK. | project=OE 5.0 }}
 +
[[ Cutipy_Test | Cutipy Test Software ]]
 +
 +
[[ Micropython | Micropython ]]
 +
 +
[[Cutipy_Getting_Started| CutiPy Getting Started]]

Revision as of 12:18, 13 February 2020

This tutorial will walk you through installing/updating MicroPython on your CutiPy device. Instuctions are given for both Windows and Linux users.

Necessary equipment

  1. CutiPy

  2. 1 Micro-USB cable

  3. A pair of needle nose pliers for wire jumper re-positioning

  4. A personal computer (Windows or Linux)

  5. EMAC's latest MicroPython firmware release


Windows Users

  1. With the USB disconnected and power removed, carefully use a pair of needle nose pliers to shift jumper JB2 upwards from FLS to to RXM (The BT0 and RXM pins will now be linked). The device is now in bootloader mode.



    NOTE
    If a version of Micropython is already installed on your device, >>>pyb.bootloader() can be inputted into the REPL console, to put the board into bootloader mode without having to move the jumper.


  2. Connect your CutiPy to your PC using the Micro-USB cable.

  3. Download and install Zadig

  4. Open Zadig and select STM32 BOOTLOADER and WinUSB

    Zadig.png



    NOTE
    The STM32 BOOTLOADER option is only available when the microUSB is connected and the device is in bootloader mode.


  5. Click Replace Driver



    NOTE
    Upon clicking “Replace Driver” the app may read “Not Responding” for a short duration and then recover. This is normal.


  6. After successfully installing the WinUSB driver, download the latest dfu-util application zip file here.

  7. Extract the zip file.

  8. For convenience, save the CutiPy firmware dfu file to the dfu-util folder.

  9. Open the Windows Command Prompt by searching and selecting "Command Prompt" from the Windows start menu.

  10. From the Command Prompt navigate to the dfu-util directory. If necessary switch drives by entering 'drive_name:. For example to switch to the C drive enter c:. Use dir to list sub-directories and use cd directory_name to navigate to a subdirectory.

    Microsof Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation. All rights reserved.

    O:\>C:

    C:\Users>cd MyUser

    C:\Users\MyUser>cd Desktop

    C:\Users\MyUser\Desktop>cd dfu-util-0.9-win64

    C:\Users\MyUser\Desktop\dfu-util-0.9-win64>



  11. Once in the dfu-util directory enter dfu-util -l. Something similar to the following should be displayed:

    C:\Users\MyUser\Desktop\dfu-util-0.9-win64>dfu-util -l

    Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
    Copyright 2010-2016 Tormod Volden and Stefan Schmidt
    This program is Free Softwasre and has ABSOLUTELY NO WARRANTY
    Please report bugs to http: // sourceforge.net / p / dfu-util / tickets /

    Found DFU: [0483:df11] ver 2200, dvenum=7, cfg =1, intf=0, path="2-1.3", alt=3, n
    ame="@Device Feature/0xFFFF0000/01*004 e", serial="336445653437"
    Found DFU: [0483:df11] ver 2200, dvenum=7, cfg =1, intf=0, path="2-1.3", alt=2, n
    ame ="@OTP Memory /0x1FFF7900/01*412 e, 01*016 e", serial="336445653437"
    Found DFU: [0483:df11] ver 2200, dvenum=7, cfg =1, intf=0, path="2-1.3", alt=1, n
    ame="@Option Bytes/0xFFFF0000/01*016 e", serial="336445653437"
    Found DFU: [0483:df11] ver 2200, dvenum=7, cfg =1, intf=0, path="2-1.3", alt=0, n
    ame="@Internal Flash /0x08000000/04*016Kg, 01*064Kg, 07*128Kg", serial="336445653
    437"

    C:\Users\MyUser\Desktop\dfu-util-0.9-win64>

  12. From this directory install the firmware to the device by entering the following into the Command Prompt, where firmware.dfu is just the name of the firmware dfu file:

    C:\Users\MyUser\Desktop\dfu-util-0.9-win64>dfu-util --alt 0 -D firmware.dfu



    NOTE
    If the firmware dfu file is saved anywhere other than the dfu-util folder, the full path location will need to be entered. E.g. dfu-util --alt 0 -D ...\firmware.dfu, where "..." should be filled in with the directory path.


    Something similar to the following should be displayed.

    C:\Users\MyUser\Desktop\dfu-util-0.9-win64>duf-util --alt 0 -D firmware.dfu

    Copyright 2005-2009 Weston Schmidt, Harald Welte and OpenMoko Inc.
    Copyright 2010-2016 Tormod Volden and Stefan Schmidt
    This program is Free Softwasre and has ABSOLUTELY NO WARRANTY
    Please report bugs to http: // sourceforge.net / p / dfu-util / tickets /

    Match vendor ID from file: 0483
    Match product ID from file: df11
    Opening DFU capable USB device...
    ID 0483:df11
    Run-time device DFU version 011a
    Claiming USB DFU Interface...
    Setting Alternate Setting #0 ...
    Determining device status: state = dfuERROR, satus = 10
    dfuERROR, clearing status
    Determining device status: state = dfuIDLE, status = 0
    dfuIDLE, continuing
    DFU mode device DFU version 011a
    Device returned tranfer size 2048
    DfuSe interface name: "Internal Flash "
    file contains 1 DFU images
    parsing DFU image 1
    image for alternate setting 0, <2 elements, total size = 386288>
    parsing element1, address = 0x08000000, size =15000
    Download [=========================] 100% 15000 bytes
    Download done.
    pasing element 2, address = 0x8020000, size =371272
    Download [=========================] 100% 371272 bytes
    Download done.
    done parsing DfuSe file

    C:\Users\MyUser\Desktop\dfu-util-0.9-win64>


    The firmware is now installed.


  13. Safely eject and disconnect the USB (Remove power), shift the JB2 pin jumper back to the original location (BT0 and FLS should now be joined). Now reconnnect the MicroUSB cable.

    Installation is now complete complete.



Linux Users

Follow the EMAC DFU instructions given here


After Firmware Installation

After installing the firmware you can open a MicroPython REPL(read evaluate print loop) console (covered here ), and verify the firmware version by entering the following into the REPL console

>>> import os
>>> os.uname()

Output should look similar to the following:

(sysname='pyboard', nodename='pyboard', rlease='0.0.1', version='394ae277 as IOT-F40
7C-XXXRX on 2019-06-07', machine = 'EMAC-CutiPy with STM32F407')
>>>

After installing the firmware perform a factory reset. This clears the file system, and adds/replaces boot.py and main.py



NOTE
The factory reset will delete all files present on the board. For this reason we recommend backing up your files if you have made any changes.


Perform a factory reset as follows (Note these instructions are a slight modification of the PyBoard factory reset instruction given here):


  1. Connect your CutiPy to your PC using the MicroUSB cable.

  2. Hold down PB1.

  3. While still holding down PB1, press and release the reset button PB5.

  4. The LD2 and LD3 will then flash, cycling through various lighting combinations corresponding to different options. Both lit corresponds to the factory reset option.

  5. Keep holding down PB1, when both LEDs are lit, release PB1 to select the factory reset option.

  6. Both LEDs should quickly flash 4 times, a third LED (LD1) will turn on.

  7. The file system is now being reset.

  8. After the file system is reset, all LEDs will turn off and the device will enter safe mode.

  9. Press and release the reset button, PB5 to boot normally.


References

https://github.com/micropython/micropython/wiki/Pyboard-Firmware-Update
https://docs.micropython.org/en/latest/pyboard/tutorial/reset.html#factory-reset-the-filesystem

Pages with Related Content

Cutipy Test Software

Micropython

CutiPy Getting Started