Difference between revisions of "Example atod"
| Line 8: | Line 8: | ||
Select ''C/C++'' and click ''OK''. | Select ''C/C++'' and click ''OK''. | ||
| − | [[File: | + | [[File:create_atod_test_open_cslashcplusplus_perspective.jpg|600px|thumb|left|Figure 1: Select C/C++ Perspective]] |
2. Open the ''atod_test'' project. | 2. Open the ''atod_test'' project. | ||
Revision as of 12:14, 13 November 2013
This procedure provides an overview of how to compile and run the atod_test C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.
1. Open the C/C++ editing perspective.
From the Eclipse menubar, select Window->Open Perspective->Other...
Select C/C++ and click OK.
File:Create atod test open cslashcplusplus perspective.jpg
Figure 1: Select C/C++ Perspective
2. Open the atod_test project.
OPEN THE PROJECT IN ECLIPSE
The atod_test example project source can be found in the projects/ subdirectory of the EMAC OE SDK root directory. The full path to the source is as follows:
/path/to/sdk/EMAC-OE-arm-linux-gnueabi-SDK_4.0/projects/atod_test/
COMPILE IT
RUN IT
WHAT IT DOES
The atod test reads all channels of an indexed atod device on an EMAC OE Linux operating system.
