Difference between revisions of "Example atod"
(→What atod_test does) |
|||
| Line 33: | Line 33: | ||
| − | ==What ''atod_test'' does== | + | ====What ''atod_test'' does==== |
The atod test reads all channels of an indexed atod device on an EMAC OE Linux operating system. | The atod test reads all channels of an indexed atod device on an EMAC OE Linux operating system. | ||
Revision as of 13:22, 13 November 2013
This procedure provides an overview of how to compile and run the atod_test C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.
Contents
1. Open the C/C++ editing perspective
From the Eclipse menubar select Window->Open Perspective->Other...
Select C/C++ and click OK.
2. Open the atod_test project
From the Eclipse menubar select File->New->Makefile Project With Existing Code...
Click the Browse button and navigate to the directory of the atod_test example project.
The atod_test example project source can be found in the projects/ subdirectory of the EMAC OE SDK root directory. The full path is:
/path/to/sdk/EMAC-OE-arm-linux-gnueabi-SDK_4.0/projects/atod_test/
After you have successfully specified the path to the atod_test project directory, click Finish.
Build it
- This intentionally left blank pending new build system.**
What atod_test does
The atod test reads all channels of an indexed atod device on an EMAC OE Linux operating system.
