Example atod

TODO: {{#todo:Review(11.12.13-11:38->JG+)|JGreene|oe 4,oe 5,ky,md,Review}}

This procedure provides an overview of how to compile and run the atod_test C example project. It assumes familiarity with the C programming language and is intended to be used by experienced programmers who are looking to learn the EMAC SDK.

1. Open the C/C++ editing perspective

From the Eclipse menubar select Window->Open Perspective->Other...

Select C/C++ and click OK.

Figure 1: Select C/C++ Perspective.

2. Open the atod_test project

From the Eclipse menubar select File->New->Makefile Project With Existing Code... Click the Browse button and navigate to the directory of the atod_test example project. The atod_test example project source can be found in the projects/ subdirectory of the EMAC OE SDK root directory. The full path is: /path/to/sdk/EMAC-OE-arm-linux-gnueabi-SDK_4.0/projects/atod_test/ After you have successfully specified the path to the atod_test project directory, click Finish.

Figure 2: Specify the location of the atod_test project.

WHAT IT DOES

The atod test reads all channels of an indexed atod device on an EMAC OE Linux operating system.