Example hello

From wiki.emacinc.com
Revision as of 16:29, 2 January 2014 by Jgreene (talk | contribs) (Summary)
Jump to: navigation, search
TODO: {{#todo:FinalDraft(01.02.14-14:09->JG+);(01.02.14-14:30->MD+)|Jgreene|oe 4,oe 5,jg,md,FinalDraft,mg}}

This is a guide to the hello C example project included in the EMAC OE SDK.

This is a basic "hello world" project.

The hello project builds one executable: hello.

Opening, Building and Uploading the Project Files

1. Open the C/C++ editing perspective.

stub

2. Open the project files.

stub

3. Build the project.

stub

4. Upload the executables to the target system.

stub

Usage and Behavior

Hardware Requirements

The hello C example project will run on any system for which it can be compiled.

Using timer

The hello program is executed from the console. It takes no parameters.

./hello

The program prints a hello message to the console.

Usage Example

root@som9g20:/tmp# ./hello
Hello EMAC OE!

Summary

The hello C example project is your basic "hello world" project.