Difference between revisions of "Example io demo"

From wiki.emacinc.com
Jump to: navigation, search
(Usage Example. Count Demo)
(46 intermediate revisions by 5 users not shown)
Line 1: Line 1:
{{todo|InProgress(12.05.13-12:47->JG+)|Jgreene|project=oe 4,oe 5,jg,md,Review}}
+
{{todo|SEOKWREV (01.03.14-16:47->JG+);(01.03.14-17:35->MD+);(04.07.14-09:45->BS+);(04.09.14-16:15->BS+)|Jgreene|project=oe 4,oe 5,jg,md,SEOKWREV,ky,bs}}
This is a guide to the <code>io demo</code> C example project included in the EMAC OE SDK.
 
  
The <code>io_demo</code> project provides four examples of carrier board IO:<br />
+
{{#seo:
 +
|title=io demo
 +
|titlemode=append
 +
|keywords=ADC example,Ring Counter,Binary Counter
 +
|description=This is a guide to the <code>io_demo</code> C example project included in the EMAC OE SDK.
 +
}}
 +
This is a guide to the <code>[http://git.emacinc.com/OE/qt-creator-example-projects/tree/master/io_demo io_demo]</code> C example project included in the EMAC OE SDK.
 +
 
 +
The <code>io_demo</code> project provides four examples using SOM-150ES carrier board I/O:<br />
 
* An analog-to-digital converter demo.
 
* An analog-to-digital converter demo.
 
* A counter demo.     
 
* A counter demo.     
Line 12: Line 19:
 
== Opening, Building and Uploading the Project Files ==
 
== Opening, Building and Uploading the Project Files ==
  
<big>1. Open the C/C++ editing perspective.</big>
+
For information on opening the project from within Eclipse, please see [[Importing the EMAC OE SDK Projects with Eclipse]]. Then, follow [[Using the EMAC OE SDK Projects with Eclipse]] for information on how to build, upload and execute the example.
  
stub
+
Alternatively, the <code>Makefile</code> can be used with the <code>make</code> command from the commandline to build and upload the example.  For more information on this method, please see [[Using EMAC OE SDK Example Projects]].
  
<big>2. Open the project files.</big>
 
  
stub
+
== Usage and Behavior ==
  
<big>3. Build the project.</big>
+
===Hardware Requirements===
  
stub
+
To use the '''io demo''' program you will need the following hardware.
  
<big>4. Upload the binary to the target machine.</big>
+
* An EMAC [http://www.emacinc.com/som/som150es.htm SOM-150ES] carrier board. <br />
 +
* A compatible EMAC SoM for that carrier board ([http://www.emacinc.com/products/system_on_module/SoM-9260M SOM-9260M], [http://www.emacinc.com/products/system_on_module/som-9G20m SOM-9G20M] and [http://www.emacinc.com/products/system_on_module/som-9x25 SOM-9X25] are all compatible).<br />
 +
* A multimeter or oscilloscope. See [[Example_io_demo#Input_to_Output_Demo_Usage | Input to Output Demo]] and  [[Example_io_demo#Count_Demo_Usage | Count Demo]] for details.<br />
 +
* A cable long enough to reach from GPIO Port B to GPIO Port C. See [[Example_io_demo#Input_to_Output_Demo_Usage | Input to Output Demo]] for details.<br />
  
stub
+
====Carrier Board====
  
== Usage and Behaviour ==
+
[[File:know_your_som_150.jpg|frame|left|SOM-150ES carrier board with GPIO, LEDs and analog IO indicated.]]
 
+
<br clear=all>
===Hardware Requirements===
 
 
 
To use the '''io demo''' program you will need the following hardware.
 
  
* An EMAC carrier board: [http://www.emacinc.com/som/som150es.htm SOM-150ES], [http://www.emacinc.com/som/som200es.htm SOM-200ES], [http://www.emacinc.com/som/som210es.htm SOM-210ES], [http://www.emacinc.com/som/som212es.htm SOM-212ES] or [http://www.emacinc.com/som/som250es.htm SOM-250ES].<br />
+
This is a detail of the '''HDR1 PLD & BUFFERED GPIO''' header. Pin 49 is Vcc. The bottom pins: 2, 4, 6...46, 48, 50; are all ground. Port A is pins 1, 3, 5, 7, 9, 11, 13, 15. Port B is pins 17, 19, 21, 23, 25, 27, 29, 31. Port C is pins 33, 35, 37, 39, 41, 43, 45, 47.  
* A compatible EMAC SoM for that carrier board ([http://www.emacinc.com/products/system_on_module/SoM-9260M SOM-9260M], [http://www.emacinc.com/products/system_on_module/som-9G20m SOM-9G20M] and [http://www.emacinc.com/products/system_on_module/som-9x25 SOM-9X25] are all compatible and available from EMAC).<br />
 
* A multimeter or oscilloscope. See [http://wikidev.emacinc.com/wiki/Example_io_demo#Usage_Example._Input_to_Output_Demo Usage Example. Input to Output Demo] and  [http://wikidev.emacinc.com/wiki/Example_io_demo#Usage_Example._Count_Demo Usage Example. Count Demo] for details.<br />
 
* A ribbon cable just long enough to reach from GPIO Port B to GPIO Port C. See [http://wikidev.emacinc.com/wiki/Example_io_demo#Usage_Example._Input_to_Output_Demo Usage Example. Input to Output Demo] for details.<br />
 
  
[[File:som150_with_SoM.jpg|frame|left|This is a SOM-150ES carrier board carrying a SoM]]
+
[[File:gpio_header_detail.png]]
<br clear=all>
 
  
===Usage for io_demo===
+
===io_demo Usage===
  
 
Run '''io demo''' from the console. It takes no parameters.
 
Run '''io demo''' from the console. It takes no parameters.
Line 65: Line 67:
 
</syntaxhighlight>
 
</syntaxhighlight>
  
Now we can press '''a''', '''c''', '''i''' or '''r''' to run a demo; or '''x''' to exit.
+
Now, press '''a''', '''c''', '''i''' or '''r''' to run a demo; otherwise, press '''x''' to exit.
 +
 
 +
===A/D Demo Usage===
 +
 
 +
From the demo menu press '''a'''.
 +
 
 +
<syntaxhighlight lang="text">
 +
****************************
 +
    Demo Menu             
 +
                           
 +
A/D Demo            - a   
 +
Count Demo          - c   
 +
Input to Output Demo - i   
 +
Ring Demo            - r   
 +
                           
 +
Exit                - x   
 +
                           
 +
Enter Selection: a
 +
 
 +
A/D Demo
 +
[0]=126 [1]=11B [2]=12C [3]=12B
 +
</syntaxhighlight>
  
====Know Your Carrier Board====
+
The output shows the stray charge on the inputs being read by the analog-to-digital converter on pins 11, 12, 13, 14. Press '''a''' a few times to watch the values change.
  
[[File:portABC_gpio_header_and_LEDs_location.jpg|frame|left|Pictured in our usage examples below is the SOM-150ES that we used for testing. Other carrier boards will have a similar layout. Note the locations of the GPIO header and LED strip.]]
+
This is the HDR8 ANALOG IO header.
<br clear=all>
 
  
'''TODO indicate the analog IO port too'''
+
[[File:analog_io_header_detail.jpg]]
  
'''HEY MIKE, I COULD HAVE PICTURES OF ALL THE CARRIER BOARDS WITH ALL IMPORTANT STUFF INDICATED. WHAT DO YOU THINK?'''
+
Let's do a couple of experiments on our analog in pins.  
  
===Usage Example. A/D Demo===
+
Connect pin 20 to pin 11 and hit '''a'''. Note that the first value is higher than the others. It should read approximately '''3FF'''. This means that the first analog-in pin has 2.5V on it.
stub
 
  
did somebody say something about there already being an analog out built right onto the carrier board?
+
Connect pin 1 to pin 11. Hit '''a'''. Note that the first value is lower than the others. It's the vicinity of 0. That means that the first analog-in pin is pulled down to ground.
  
===Usage Example. Count Demo===
+
===Count Demo Usage===
  
 
From the demo menu press '''c'''.
 
From the demo menu press '''c'''.
  
 
The system counts from 0 to 255 in binary. It takes about 15 seconds to complete.<br />
 
The system counts from 0 to 255 in binary. It takes about 15 seconds to complete.<br />
The steps of this process are reflected in the GPIO PortC header pins(see [[http://wikidev.emacinc.com/wiki/Example_io_demo#Know_Your_Carrier_Board Know Your Carrier Board]], above). As each bit in our 8bit register is set to 1, the corresponding pin in the PortC header momentarily registers 5 volts (easily detected with a multimeter or oscilloscope).<br />
+
The steps of this process are reflected in the GPIO PortC header pins (see [[Example_io_demo#Carrier_Board | Carrier Board]], above). As each bit in our 8-bit register is set to 1, the corresponding pin in the PortC header momentarily registers 5 volts (easily detected with a multimeter or oscilloscope).
More visibly, the process is also reflected in the strip of 8 LEDs on the board (LD1-LD8). A lit LED indicates a 1 in our 8 bit register and an unlit LED indicates a 0. When the counting process is finished all 8 LEDs are lit (255).
 
 
 
[[File:gpio_portc_detail.jpg|frame|left|Details of GPIO Header : Port C. Note that half of the GPIO header is ground. Also note that Port C starts on the second header pin.]]
 
<br clear=all>
 
  
===Usage Example. Input to Output Demo===
+
More visibly, the counting process is also reflected in the strip of 8 LEDs on the board LD1-LD8. (see [[Example_io_demo#Carrier_Board | Carrier Board]], above). A lit LED indicates a 1 in our 8-bit register and an unlit LED indicates a 0. When the counting process is finished, all 8 LEDs are lit (255).
  
In this usage example the carrier board talks to itself. We send an 8bit data stream directly from Port B to Port C via a short piece of ribbon cable.
+
===Input to Output Demo Usage===
  
<detail of board. gpio header closeup with ports b and c labelled>
+
In this usage example the carrier board talks to itself. We send an 8-bit data stream directly from Port B to Port C via a short piece of cable. See [[Example_io_demo#Carrier_Board | Carrier Board]], above, for details.
  
This is the ribbon cable that we made for our input-to-output demo. Note that we connect PortC:pin0 to PortB:pin0; PortC:pin1 to PortB:pin1; etc.<br />
+
This is the ribbon cable for the input-to-output demo. Note that we connect PortC:pin0 to PortB:pin0; PortC:pin1 to PortB:pin1; etc.<br />
 
[[File:iodemo_homemaderibboncable.jpg|500px|border|]]
 
[[File:iodemo_homemaderibboncable.jpg|500px|border|]]
  
Here's our cable plugged into the GPIO header. You see that PortC:pin0 outputs to PortB:pin0; PortC:pin1 outputs to PortB:pin1; etc.
+
Here's the cable plugged into the GPIO header. You see that PortC:pin0 outputs to PortB:pin0; PortC:pin1 outputs to PortB:pin1; etc.
 
[[File:iodemo_homemaderibboncable_closeup.jpg|500px|border|]]
 
[[File:iodemo_homemaderibboncable_closeup.jpg|500px|border|]]
  
Our data stream for each pin is 1,0,1,0,1,0... That is to say: all pins are set to 1, then they are all set to 0, then to 1 again, etc. We observe our data stream in the strip of 8 LEDs on the carrier board. They blink in unison.
+
The data stream for each pin is 1, 0, 1, 0, 1, 0... That is to say: all pins are set to 1, then they are all set to 0, then to 1 again, etc. We observe our data stream in the strip of 8 LEDs on the carrier board. They blink in unison.
  
'''Note''' The blinking may get a little out of synch after a few seconds. This is normal.
+
'''Note''' The blinking may get a little out of sync after a few seconds. This is normal.
  
 
===Usage Example. Ring Demo===
 
===Usage Example. Ring Demo===
  
Refer to the SOM-150ES carrier board surface mount LEDs LD1-LD8 for output.
+
From the demo menu press '''r'''.
  
[[File:Io demo led action sample 2.png | 500px]]
+
The system sets a bit on Port C to 1, then sets it to 0, then sets the bit after that to 1, then sets that pin to 0, and so on, sequentially. This shows a ring counter on the LED strip (see [[Example_io_demo#Carrier_Board | Carrier Board]], above).
  
The board lights the LEDs in numeric sequence, 1-8, then repeats; looping until a key is pressed.
+
The steps of this process are reflected in the GPIO PortC header pins. As each bit in the 8-bit register is set to 1, the corresponding pin in the PortC header momentarily registers 5 volts (easily detected with a multimeter or oscilloscope).

Revision as of 13:46, 14 June 2019

TODO: {{#todo:SEOKWREV (01.03.14-16:47->JG+);(01.03.14-17:35->MD+);(04.07.14-09:45->BS+);(04.09.14-16:15->BS+)|Jgreene|oe 4,oe 5,jg,md,SEOKWREV,ky,bs}}

This is a guide to the io_demo C example project included in the EMAC OE SDK.

The io_demo project provides four examples using SOM-150ES carrier board I/O:

  • An analog-to-digital converter demo.
  • A counter demo.
  • An input-to-output demo.
  • A ring demo.

The io_demo project builds one executable: io_demo.

Opening, Building and Uploading the Project Files

For information on opening the project from within Eclipse, please see Importing the EMAC OE SDK Projects with Eclipse. Then, follow Using the EMAC OE SDK Projects with Eclipse for information on how to build, upload and execute the example.

Alternatively, the Makefile can be used with the make command from the commandline to build and upload the example. For more information on this method, please see Using EMAC OE SDK Example Projects.


Usage and Behavior

Hardware Requirements

To use the io demo program you will need the following hardware.

Carrier Board

SOM-150ES carrier board with GPIO, LEDs and analog IO indicated.


This is a detail of the HDR1 PLD & BUFFERED GPIO header. Pin 49 is Vcc. The bottom pins: 2, 4, 6...46, 48, 50; are all ground. Port A is pins 1, 3, 5, 7, 9, 11, 13, 15. Port B is pins 17, 19, 21, 23, 25, 27, 29, 31. Port C is pins 33, 35, 37, 39, 41, 43, 45, 47.

Gpio header detail.png

io_demo Usage

Run io demo from the console. It takes no parameters.

 ./io_demo

This brings up a menu of demos.

****************************
     Demo Menu              
                            
A/D Demo             - a    
Count Demo           - c    
Input to Output Demo - i    
Ring Demo            - r    
                            
Exit                 - x    
                            
Enter Selection:

Now, press a, c, i or r to run a demo; otherwise, press x to exit.

A/D Demo Usage

From the demo menu press a.

****************************
     Demo Menu              
                            
A/D Demo             - a    
Count Demo           - c    
Input to Output Demo - i    
Ring Demo            - r    
                            
Exit                 - x    
                            
Enter Selection: a

A/D Demo
[0]=126 [1]=11B [2]=12C [3]=12B

The output shows the stray charge on the inputs being read by the analog-to-digital converter on pins 11, 12, 13, 14. Press a a few times to watch the values change.

This is the HDR8 ANALOG IO header.

Analog io header detail.jpg

Let's do a couple of experiments on our analog in pins.

Connect pin 20 to pin 11 and hit a. Note that the first value is higher than the others. It should read approximately 3FF. This means that the first analog-in pin has 2.5V on it.

Connect pin 1 to pin 11. Hit a. Note that the first value is lower than the others. It's the vicinity of 0. That means that the first analog-in pin is pulled down to ground.

Count Demo Usage

From the demo menu press c.

The system counts from 0 to 255 in binary. It takes about 15 seconds to complete.
The steps of this process are reflected in the GPIO PortC header pins (see Carrier Board, above). As each bit in our 8-bit register is set to 1, the corresponding pin in the PortC header momentarily registers 5 volts (easily detected with a multimeter or oscilloscope).

More visibly, the counting process is also reflected in the strip of 8 LEDs on the board LD1-LD8. (see Carrier Board, above). A lit LED indicates a 1 in our 8-bit register and an unlit LED indicates a 0. When the counting process is finished, all 8 LEDs are lit (255).

Input to Output Demo Usage

In this usage example the carrier board talks to itself. We send an 8-bit data stream directly from Port B to Port C via a short piece of cable. See Carrier Board, above, for details.

This is the ribbon cable for the input-to-output demo. Note that we connect PortC:pin0 to PortB:pin0; PortC:pin1 to PortB:pin1; etc.
Iodemo homemaderibboncable.jpg

Here's the cable plugged into the GPIO header. You see that PortC:pin0 outputs to PortB:pin0; PortC:pin1 outputs to PortB:pin1; etc. Iodemo homemaderibboncable closeup.jpg

The data stream for each pin is 1, 0, 1, 0, 1, 0... That is to say: all pins are set to 1, then they are all set to 0, then to 1 again, etc. We observe our data stream in the strip of 8 LEDs on the carrier board. They blink in unison.

Note The blinking may get a little out of sync after a few seconds. This is normal.

Usage Example. Ring Demo

From the demo menu press r.

The system sets a bit on Port C to 1, then sets it to 0, then sets the bit after that to 1, then sets that pin to 0, and so on, sequentially. This shows a ring counter on the LED strip (see Carrier Board, above).

The steps of this process are reflected in the GPIO PortC header pins. As each bit in the 8-bit register is set to 1, the corresponding pin in the PortC header momentarily registers 5 volts (easily detected with a multimeter or oscilloscope).