Example serial test
This is a guide to the
serial C example project included in the EMAC OE SDK.
This is a simple backlight brightness control. It's written for the EMAC PPC-E7 and SoM-9307 but it will probably run on anything with a backlight. It implements a slider application in GTK+ that directly controls the backlight through its sysfs interface. It has been tested under Xfbdev/Matchbox.
serial project builds one executable:
Opening, Building and Uploading the Project Files
1. Open the C/C++ editing perspective.
2. Open the project files.
3. Build the project.
4. Upload the executables to the target system.