Difference between revisions of "Example watchdog"

From wiki.emacinc.com
Jump to: navigation, search
(Usage Example)
 
(54 intermediate revisions by 6 users not shown)
Line 1: Line 1:
{{todo|Review(01.02.14-15:25->JG+)|Jgreene|project=oe 4,oe 5,jg,md,Review}}
+
{{todo|Complete (01.03.14-11:32->JG+);(01.03.14-11:42->MD-);(02.04.14-19:30->MD);(02.06.14-17:32->BS+);(02.06.14-19:15->MD+);(04.07.14-10:15->BS+);(04.10.14-11:50->BS+);(11.10.15-15:30->MG+)|Brian Serrano|project=oe 4,oe 5,bs,md,SEOKWREV,Complete}}
 +
 
 +
{{#seo:
 +
|title=Example watchdog
 +
|titlemode=append
 +
|keywords=Example watchdog,watchdog timer,watchdog test,Linux watchdog
 +
|description=This is a guide to the <code>watchdog</code> C example project included in the EMAC OE SDK.
 +
}}
 
This is a guide to the <code>watchdog</code> C example project included in the EMAC OE SDK.
 
This is a guide to the <code>watchdog</code> C example project included in the EMAC OE SDK.
  
A Watchdog Timer (WDT) is a hardware circuit that can reset the computer system in case of a software fault. This is an example test for the Linux watchdog API.  
+
A '''watchdog timer''' (WDT) is a hardware circuit that can reset the computer system in case of a software fault. This is an example test for the Linux watchdog API.  
 +
 
 +
For more information about the protocol see the following page: http://en.wikipedia.org/wiki/Watchdog_timer
  
 
The <code>watchdog</code> project builds one executable: <code>watchdog-test</code>.
 
The <code>watchdog</code> project builds one executable: <code>watchdog-test</code>.
Line 8: Line 17:
 
== Opening, Building and Uploading the Project Files ==
 
== Opening, Building and Uploading the Project Files ==
  
<big>stubbooo
+
For information on opening the project from within Eclipse, please see [[Importing the EMAC OE SDK Projects with Eclipse]].  Then, follow [[Using the EMAC OE SDK Projects with Eclipse]] for information on how to build, upload and execute the example.
 +
 
 +
Alternatively, the <code>Makefile</code> can be used with the <code>make</code> command from the commandline to build and upload the example.  For information on this method, please see [[Using EMAC OE SDK Example Projects]].
 +
 
 +
====EMAC SDK 5.X====
  
 +
For information on opening the project from within QtCreator, please see [[Getting_Started_With_Qt_Creator#Adding_Source_Files | QtCreator: Adding Source Files]].  Then, follow [[Getting Started With Qt Creator]] for information on how to build, upload and execute the example.
 +
 +
Alternatively, the <code>CMakefile.txt</code> can be used with the <code>cmake</code> command from the commandline to build and upload the example.  For information on this method, please see [[Getting_Started_with_the_EMAC_OE_SDK#Target_Machine_Compiling | Getting Started with the EMAC OE SDK]].
 +
 +
Code can be found at http://git.emacinc.com/OE/example-projects
 
==Usage and Behavior==
 
==Usage and Behavior==
  
<code>watchdog</code>  
+
A '''watchdog timer''' is a hardware circuit that can reset the computer system in case of a software fault.  The <code>watchdog-test</code> application can enable, disable, activate, configure and interrupt the '''watchdog timer'''.
 +
{{note| Activating watchdog invokes system reset (after timeout)}}
  
 
===Hardware Requirements===
 
===Hardware Requirements===
  
fof ofoo
+
<code>watchdog</code> will run on any system for which it can be compiled and implements the standard Linux <code>watchdog</code> API.
  
 
===<code>watchdog</code> Usage===
 
===<code>watchdog</code> Usage===
  
foo foo
+
{{cli | ./watchdog-test [-det] | hostname=emac-oe}}
  
===Usage Example===
+
;-d:Disable watchdog.
 +
;-e:Enable watchdog.
 +
;-t:Set the watchdog timeout (to a value specified in code. Default is five seconds).
  
<syntaxhighlight lang="text">
+
===Usage Example. Activating <code>watchdog</code> with a periodic interrupt===
root@som9g20:/tmp# ./watchdog-test  
+
 
 +
This will activate <code>watchdog</code> and initiate a periodic interrupt to keep it from timing out.
 +
 
 +
{{clo}}
 +
{{clio | pwd=/tmp | hostname=emac-oe | ./watchdog-test }}
 
Watchdog Ticking Away!
 
Watchdog Ticking Away!
</syntaxhighlight>
+
{{clos}}
 +
Every second <code>watchdog-test</code> is sending an IOCTL to the watchdog driver, which in turn ticks <code>watchdog</code> to reset its internal timer so it doesn't timeout and trigger a system reset.
 +
 
 +
Now we will stop interrupting <code>watchdog</code> and let it trigger a computer reset by pressing ''Ctrl+C''.
 +
 
 +
===Usage Example. Disabling <code>watchdog</code>===
 +
 
 +
{{clo}}
 +
{{clio | pwd=/tmp | hostname=emac-oe | ./watchdog-test -d }}
 +
Watchdog card disabled.
 +
{{clos}}
 +
 
 +
After running the <code>./watchdog-test -d</code> command, the program exits normally.
 +
 
 +
===Usage Example. Enabling <code>watchdog</code>===
 +
 
 +
This will enable and activate <code>watchdog</code> but it won't perform a periodic timeout interrupt (see the first usage example, above). So when you run it the program activates <code>watchdog</code> and then <code>watchdog</code> resets the system.
 +
 
 +
{{clo}}
 +
{{clio | pwd=/tmp | hostname=emac-oe | ./watchdog-test -e }}
 +
Watchdog card enabled.
 +
{{clos}}
 +
 
 +
After running the <code>./watchdog-test -e</code> command, the system resets.
 +
 
 +
===Usage Example. Setting <code>watchdog</code> timeout===
 +
 
 +
This will activate <code>watchdog</code> and set it to timeout in 5 seconds.
 +
 
 +
{{clo}}
 +
{{clio | pwd=/tmp | hostname=emac-oe | ./watchdog-test -t }}
 +
Watchdog timeout set to 5 seconds!
 +
 
 +
{{clos}}
 +
 
 +
After running the <code>./watchdog-test -t</code> command, the program exits normally. Once it exits, 5 seconds will elapse, and then the system resets.
  
We have activated the watchdog and it's counting down to computer reset - or rather it would be if we didn't keep resetting it's timer. That's the LED on the SoM blinking at about 1 Hz. Every second <code> watchdog-test</code> is sending an IOCTL to the watchdog driver, which in turn ticks the watchdog to reset its internal timer so it doesn't time-out and trigger a system reset.
+
==Summary==
  
Now we will stop interrupting the watchdog and let it trigger a computer reset. Hit CTRL-C.
+
The <code>watchdog</code> C example project demonstrates how to use the '''watchdog timer'''. The '''watchdog timer''' is there to help ensure that your system will return to a functional state should your program get stuck while executing.
  
...and the system resets.
+
EMAC provides examples of how to enable, disable, activate, configure and interrupt the <code>watchdog</code> hardware circuit. To use <code>watchdog</code> peripheral in Linux you will need a <code>watchdog</code> driver, and a <code>watchdog</code> device file. A device file is a special kind of virtual file which marks the device node in your root filesystem. Normally it's called <code>/dev/watchdog</code> .

Latest revision as of 14:22, 30 November 2022

TODO: {{#todo:Complete (01.03.14-11:32->JG+);(01.03.14-11:42->MD-);(02.04.14-19:30->MD);(02.06.14-17:32->BS+);(02.06.14-19:15->MD+);(04.07.14-10:15->BS+);(04.10.14-11:50->BS+);(11.10.15-15:30->MG+)|Brian Serrano|oe 4,oe 5,bs,md,SEOKWREV,Complete}}

This is a guide to the watchdog C example project included in the EMAC OE SDK.

A watchdog timer (WDT) is a hardware circuit that can reset the computer system in case of a software fault. This is an example test for the Linux watchdog API.

For more information about the protocol see the following page: http://en.wikipedia.org/wiki/Watchdog_timer

The watchdog project builds one executable: watchdog-test.

Opening, Building and Uploading the Project Files

For information on opening the project from within Eclipse, please see Importing the EMAC OE SDK Projects with Eclipse. Then, follow Using the EMAC OE SDK Projects with Eclipse for information on how to build, upload and execute the example.

Alternatively, the Makefile can be used with the make command from the commandline to build and upload the example. For information on this method, please see Using EMAC OE SDK Example Projects.

EMAC SDK 5.X

For information on opening the project from within QtCreator, please see QtCreator: Adding Source Files. Then, follow Getting Started With Qt Creator for information on how to build, upload and execute the example.

Alternatively, the CMakefile.txt can be used with the cmake command from the commandline to build and upload the example. For information on this method, please see Getting Started with the EMAC OE SDK.

Code can be found at http://git.emacinc.com/OE/example-projects

Usage and Behavior

A watchdog timer is a hardware circuit that can reset the computer system in case of a software fault. The watchdog-test application can enable, disable, activate, configure and interrupt the watchdog timer.



NOTE
Activating watchdog invokes system reset (after timeout)


Hardware Requirements

watchdog will run on any system for which it can be compiled and implements the standard Linux watchdog API.

watchdog Usage

root@emac-oe:~# ./watchdog-test [-det]
-d
Disable watchdog.
-e
Enable watchdog.
-t
Set the watchdog timeout (to a value specified in code. Default is five seconds).

Usage Example. Activating watchdog with a periodic interrupt

This will activate watchdog and initiate a periodic interrupt to keep it from timing out.

root@emac-oe:/tmp# ./watchdog-test

Watchdog Ticking Away!

Every second watchdog-test is sending an IOCTL to the watchdog driver, which in turn ticks watchdog to reset its internal timer so it doesn't timeout and trigger a system reset.

Now we will stop interrupting watchdog and let it trigger a computer reset by pressing Ctrl+C.

Usage Example. Disabling watchdog

root@emac-oe:/tmp# ./watchdog-test -d

Watchdog card disabled.

After running the ./watchdog-test -d command, the program exits normally.

Usage Example. Enabling watchdog

This will enable and activate watchdog but it won't perform a periodic timeout interrupt (see the first usage example, above). So when you run it the program activates watchdog and then watchdog resets the system.

root@emac-oe:/tmp# ./watchdog-test -e

Watchdog card enabled.

After running the ./watchdog-test -e command, the system resets.

Usage Example. Setting watchdog timeout

This will activate watchdog and set it to timeout in 5 seconds.

root@emac-oe:/tmp# ./watchdog-test -t

Watchdog timeout set to 5 seconds!

After running the ./watchdog-test -t command, the program exits normally. Once it exits, 5 seconds will elapse, and then the system resets.

Summary

The watchdog C example project demonstrates how to use the watchdog timer. The watchdog timer is there to help ensure that your system will return to a functional state should your program get stuck while executing.

EMAC provides examples of how to enable, disable, activate, configure and interrupt the watchdog hardware circuit. To use watchdog peripheral in Linux you will need a watchdog driver, and a watchdog device file. A device file is a special kind of virtual file which marks the device node in your root filesystem. Normally it's called /dev/watchdog .