Difference between revisions of "Example watchdog"

From wiki.emacinc.com
Jump to: navigation, search
Line 37: Line 37:
  
 
<syntaxhighlight lang=console>
 
<syntaxhighlight lang=console>
root@emac-oe/tmp#:$ ./watchdog-test  
+
root@emac-oe:/tmp$ ./watchdog-test  
 
Watchdog Ticking Away!
 
Watchdog Ticking Away!
 
</syntaxhighlight>
 
</syntaxhighlight>

Revision as of 12:11, 6 February 2014

TODO: {{#todo:Buggy(01.03.14-11:32->JG+);(01.03.14-11:42->MD-);(02.04.14-19:30->MD)|Brian Serrano|oe 4,oe 5,bs,md,Buggy}}

This is a guide to the watchdog C example project included in the EMAC OE SDK.

A watchdog timer (WDT) is a hardware circuit that can reset the computer system in case of a software fault. This is an example test for the Linux watchdog API.

For more information about the protocol see the following page: http://en.wikipedia.org/wiki/Watchdog_timer

The watchdog project builds one executable: watchdog-test.

Opening, Building and Uploading the Project Files

For information on opening the project from within Eclipse, please see Importing the EMAC OE SDK Projects with Eclipse. Then, follow Using the EMAC OE SDK Projects with Eclipse for information on how to build, upload and execute the example.

Alternatively, the Makefile can be used with the make command from the commandline to build and upload the example. For more information on this method, please see Using EMAC OE SDK Example Projects.

Usage and Behavior

A watchdog timer is a hardware circuit that can reset the computer system in case of a software fault. The watchdog-test application can enable, disable, activate, configure and interrupt the watchdog timer.

Hardware Requirements

watchdog will run on any system for which it can be compiled and implements the standard Linux watchdog API.

watchdog Usage

./watchdog-test [-det]
-d
Disable watchdog.
-e
Enable watchdog.
-t
Set the watchdog timeout (to a value specified in code. Default is five seconds).

Usage Example. Activating watchdog with a periodic interrupt

This will activate watchdog and initiate a periodic interrupt to keep it from timing out.

root@emac-oe:/tmp$ ./watchdog-test 
Watchdog Ticking Away!

Every second watchdog-test is sending an IOCTL to the watchdog driver, which in turn ticks watchdog to reset its internal timer so it doesn't timeout and trigger a system reset.

Now we will stop interrupting watchdog and let it trigger a computer reset by pressing Ctrl+C.

Usage Example. Disabling watchdog

root@emac-oe:/tmp$ ./watchdog-test -d 
Watchdog card disabled.

NOTE: the ellipses starting off a sentence fragment is unacceptable. This needs to be worded nicely instead (for every fragment starting with an ellipses throughout this document).

After running the ./watchdog-test -d command, the program exits normally.

Usage Example. Enabling watchdog

This will enable and activate watchdog but it won't perform a periodic timeout interrupt (see the first usage example, above). So when you run it the program activates watchdog and then watchdog resets the system.

root@emac-oe:/tmp$ ./watchdog-test -e
Watchdog card enabled.

After running the ./watchdog-test -e command, the system resets.

Usage Example. Setting watchdog timeout

This will activate watchdog and set it to timeout in 5 seconds.

root@emac-oe:/tmp$ ./watchdog-test -t
Watchdog timeout set to 5 seconds!

After running the ./watchdog-test -t command, the program exits normally. Once it exits, 5 seconds will elapse, and then the system resets.

Summary

The watchdog C example project demonstrates how to use the watchdog timer. We provide examples of how to enable, disable, activate, configure and interrupt the watchdog hardware circuit.

NOTE: At least give the reader an idea of why they may want to use this, and how to incorporate it into their system.