Difference between revisions of "Installing QtCreator"

From wiki.emacinc.com
Jump to: navigation, search
(Created page with "{{todo| Write this|Michael Gloff|project=oe 5,mg}} ==Install Qt Creator== <cl> 1. Download Qt Creator from the Qt project web page: * [http://download.qt-project.org/officia...")
 
Line 20: Line 20:
  
 
The installation wizard will start.  
 
The installation wizard will start.  
 +
 +
[[File:Qt_Creator_Install_1.png|400px|thumb|left|Figure 1: Qt Creator Installation Wizard]]
 +
 +
<br clear=all>
 +
 
* Press '''next''' to proceed.
 
* Press '''next''' to proceed.
 +
 +
[[File:Qt_Creator_Install_2.png|400px|thumb|left|Figure 1: Qt Creator Installation Wizard]]
 +
 +
<br clear=all>
 +
 
* Choose an installation directory then press '''next'''
 
* Choose an installation directory then press '''next'''
 +
 +
[[File:Qt_Creator_Install_3.png|400px|thumb|left|Figure 1: Qt Creator Installation Wizard]]
 +
 +
<br clear=all>
 
* Accept the license agreement then press '''next'''
 
* Accept the license agreement then press '''next'''
 +
 +
[[File:Qt_Creator_Install_4.png|400px|thumb|left|Figure 1: Qt Creator Installation Wizard]]
 +
 +
<br clear=all>
 +
 
* Press '''install''' to begin the installation
 
* Press '''install''' to begin the installation
 +
 +
[[File:Qt_Creator_Install_5.png|400px|thumb|left|Figure 1: Qt Creator Installation Wizard]]
 +
 +
<br clear=all>
 +
 
* A status bar will appear. Press '''finish''' to exit the installation wizard
 
* A status bar will appear. Press '''finish''' to exit the installation wizard
 
</cl>
 
</cl>
Line 30: Line 54:
 
1. Open Qt Creator
 
1. Open Qt Creator
 
* Click Tools->Options...
 
* Click Tools->Options...
 +
* Select '''Devices''' from the left pane
 +
i. Press the '''Add...''' button
 +
* Select Generic Linux Device then press '''Start Wizard'''
 +
* Type in a name, the IP address, user name and password for the device
 +
* Click '''Next >'''
 +
* Click '''Finish'''
 +
* A connection will be established with the target device
 +
* Click Apply
 
* Select Build & Run from the left pane
 
* Select Build & Run from the left pane
* Select the Qt Versions tab
+
* Select the '''Qt Versions''' tab
  i. Press the Add... button
+
  i. Press the '''Add...''' button
  * Navigate to /opt/emac/5.0.0/sysroots/i686/usr/bin/
+
  * Navigate to /opt/emac/5.0.0/sysroots/i686-emacsdk-linux/usr/bin/
 
  * Select qmake2
 
  * Select qmake2
 
  * Press apply
 
  * Press apply
* Select the Compilers tab
+
* Select the '''Compilers''' tab
 
  i. Press Add->GCC
 
  i. Press Add->GCC
 
  * Type in a name such as Armv7 Gcc
 
  * Type in a name such as Armv7 Gcc
 
  * Click Browse...
 
  * Click Browse...
  * Navigate to /opt/emac/5.0.0/sysroots/i686/usr/bin/target_arch/
+
  * Navigate to /opt/emac/5.0.0/sysroots/i686-emacsdk-linux/usr/bin/''target_arch''/
  * Select target_arch-emac-linux-gcc
+
  * Select ''target_arch''-emac-linux-gcc
* Select the Debuggers tab
+
* Select the '''Debuggers''' tab
  i. Press Add
+
  i. Press '''Add'''
 
  * Type in a name such as Armv7 Debugger
 
  * Type in a name such as Armv7 Debugger
 
  * Click Browse...
 
  * Click Browse...
  * Navigate to /opt/emac/5.0.0/sysroots/i686/usr/bin/target_arch/
+
  * Navigate to /opt/emac/5.0.0/sysroots/i686/usr/bin/''target_arch''/
  * Select target_arch-emac-linux-gdb</cl>
+
  * Select ''target_arch''-emac-linux-gdb
 +
* Select the '''Kits''' tab
 +
i. Press the '''Add''' button
 +
* Type in a name such as Armv7
 +
* Change the '''Device type:''' to Generic Linux Device
 +
* Change the '''Device:''' to the one configured in step 3
 +
* Type /opt/emac/5.0.0/sysroots/''target_arch'' into the '''Sysroot''' line
 +
* Change the '''Compiler:''' to the one created in step 6
 +
* Change the '''Debugger:''' to the one created in step 7
 +
* Change the '''Qt version:''' to the one created in step 5
 +
* Press '''Apply''' then '''Ok'''
 +
</cl>

Revision as of 14:54, 12 May 2014

TODO: {{#todo: Write this|Michael Gloff|oe 5,mg}}

Install Qt Creator

  1. Download Qt Creator from the Qt project web page:

  2. Change to the directory where Qt Creator was downloaded from the command line:

     developer@ldc:~$ cd /download/directory
    
  3. Make Qt Creator installer executable and run installer script:

     developer@ldc:~$ chmod +x qt-creator-opensource-linux-x86-3.1.0.run
     developer@ldc:~$ ./qt-creator-opensource-linux-x86-3.1.0.run
    

    The installation wizard will start.

    Figure 1: Qt Creator Installation Wizard


  4. Press next to proceed.

    Figure 1: Qt Creator Installation Wizard


  5. Choose an installation directory then press next

    Figure 1: Qt Creator Installation Wizard


  6. Accept the license agreement then press next

    Figure 1: Qt Creator Installation Wizard


  7. Press install to begin the installation

    Figure 1: Qt Creator Installation Wizard


  8. A status bar will appear. Press finish to exit the installation wizard

Configure Kits in Qt Creator

  1. Open Qt Creator

  2. Click Tools->Options...

  3. Select Devices from the left pane

    1. Press the Add... button

    2. Select Generic Linux Device then press Start Wizard

    3. Type in a name, the IP address, user name and password for the device

    4. Click Next >

    5. Click Finish

    6. A connection will be established with the target device

    7. Click Apply

  4. Select Build & Run from the left pane

  5. Select the Qt Versions tab

    1. Press the Add... button

    2. Navigate to /opt/emac/5.0.0/sysroots/i686-emacsdk-linux/usr/bin/

    3. Select qmake2

    4. Press apply

  6. Select the Compilers tab

    1. Press Add->GCC

    2. Type in a name such as Armv7 Gcc

    3. Click Browse...

    4. Navigate to /opt/emac/5.0.0/sysroots/i686-emacsdk-linux/usr/bin/target_arch/

    5. Select target_arch-emac-linux-gcc

  7. Select the Debuggers tab

    1. Press Add

    2. Type in a name such as Armv7 Debugger

    3. Click Browse...

    4. Navigate to /opt/emac/5.0.0/sysroots/i686/usr/bin/target_arch/

    5. Select target_arch-emac-linux-gdb

  8. Select the Kits tab

    1. Press the Add button

    2. Type in a name such as Armv7

    3. Change the Device type: to Generic Linux Device

    4. Change the Device: to the one configured in step 3

    5. Type /opt/emac/5.0.0/sysroots/target_arch into the Sysroot line

    6. Change the Compiler: to the one created in step 6

    7. Change the Debugger: to the one created in step 7

    8. Change the Qt version: to the one created in step 5

    9. Press Apply then Ok