Difference between revisions of "Installing QtCreator"

From wiki.emacinc.com
Jump to: navigation, search
Line 50: Line 50:
 
* A status bar will appear. Press '''finish''' to exit the installation wizard
 
* A status bar will appear. Press '''finish''' to exit the installation wizard
 
</cl>
 
</cl>
==Configure Kits in Qt Creator==
 
<cl>
 
1. Source the environment setup script
 
<syntaxhighlight lang="console">
 
developer@ldc:~$ source /opt/emac/5.0.0/environment-setup-i586-emac-linux
 
</syntaxhighlight>
 
* Open Qt Creator
 
<syntaxhighlight lang="console">
 
developer@ldc:~$ /home/developer/qtcreator-3.1.0/bin/qtcreator
 
</syntaxhighlight>
 
  
 +
== Next Steps ==
  
* Click Tools->Options...
+
Once Qt Creator is installed, the next step is to [[Configuring Qt Creator|configure Qt Creator.]]
* Select '''Devices''' from the left pane
 
i. Press the '''Add...''' button
 
* Select Generic Linux Device then press '''Start Wizard'''
 
* Type in a name, the IP address, user name and password for the device
 
* Click '''Next >'''
 
* Click '''Finish'''
 
* A connection will be established with the target device
 
* Click Apply
 
* Select Build & Run from the left pane
 
* Select the '''Qt Versions''' tab
 
i. Press the '''Add...''' button
 
* Navigate to /opt/emac/5.0.0/sysroots/i686-emacsdk-linux/usr/bin/
 
* Select qmake2
 
* Press apply
 
 
 
[[File:Qt_Kit_qmake.png|500px|thumb|left|Figure 1: Qt Creator Kit Qmake]]
 
 
 
<br clear=all>
 
 
 
* Select the '''Compilers''' tab
 
i. Press '''Add->GCC'''
 
* Type in a name such as i586 Gcc
 
* Click Browse...
 
* Navigate to /opt/emac/5.0.0/sysroots/i686-emacsdk-linux/usr/bin/''target_arch''/
 
* Select ''target_arch''-emac-linux-gcc
 
 
 
[[File:Qt_Kit_GCC.png|500px|thumb|left|Figure 2: Qt Creator Kit Compiler]]
 
 
 
<br clear=all>
 
 
 
* Select the '''Debuggers''' tab
 
i. Press '''Add'''
 
* Type in a name such as i586 Debugger
 
* Click '''Browse...'''
 
* Navigate to /opt/emac/5.0.0/sysroots/i686/usr/bin/''target_arch''/
 
* Select ''target_arch''-emac-linux-gdb
 
 
 
[[File:Qt_Kit_GDB.png|500px|thumb|left|Figure 3: Qt Creator Kit Debugger]]
 
 
 
<br clear=all>
 
 
 
* Select the '''Kits''' tab
 
i. Press the '''Add''' button
 
* Type in a name such as i586
 
* Change the '''Device type:''' to Generic Linux Device
 
* Change the '''Device:''' to the one configured in step 3
 
* Type /opt/emac/5.0.0/sysroots/''target_arch'' into the '''Sysroot''' line
 
* Change the '''Compiler:''' to the one created in step 6
 
* Change the '''Debugger:''' to the one created in step 7
 
* Change the '''Qt version:''' to the one created in step 5
 
* Press '''Apply''' then '''Ok'''
 
 
 
 
 
[[File:Qt_Kit.png|500px|thumb|left|Figure 4: Qt Creator Kit]]
 
 
 
<br clear=all>
 
</cl>
 

Revision as of 16:26, 9 January 2015

TODO: {{#todo: Write this|Michael Gloff|oe 5,mg}}

Install Qt Creator

  1. Download Qt Creator from the Qt project web page:

  2. Change to the directory where Qt Creator was downloaded from the command line:

     developer@ldc:~$ cd /download/directory
    
  3. Make Qt Creator installer executable and run installer script:

     developer@ldc:~$ chmod +x qt-creator-opensource-linux-x86-3.1.0.run
     developer@ldc:~$ ./qt-creator-opensource-linux-x86-3.1.0.run
    

    The installation wizard will start.

    Figure 1: Qt Creator Installation Wizard


  4. Press next to proceed.

    Figure 2: Qt Creator Installation Wizard


  5. Choose an installation directory then press next

    Figure 3: Qt Creator Installation Wizard


  6. Accept the license agreement then press next

    Figure 4: Qt Creator Installation Wizard


  7. Press install to begin the installation

    Figure 5: Qt Creator Installation Wizard


  8. A status bar will appear. Press finish to exit the installation wizard

Next Steps

Once Qt Creator is installed, the next step is to configure Qt Creator.