Difference between revisions of "Repartitioning a CompactFlash Disk for Linux"

From wiki.emacinc.com
Jump to: navigation, search
m (Hid category tag.)
m (Reverted edits by Mdean (talk) to last revision by Mgloff)
Line 1: Line 1:
{{todo|Complete (12.17.13-00:30->MD+);(12.17.13-15:05->KY+);(12.17.13-19:15->MG+)|Mike Dean|project=oe 4,oe 5,md,ky,mg,Complete}}
+
{{todo|needs new version for Ubuntu (12.17.13-00:30->MD+);(12.17.13-15:05->KY+);(12.17.13-19:15->MG+)|Mike Dean|project=oe 4,oe 5,md,ky,mg,Complete}}
  
 
The majority of EMAC's x86-based systems utilize CompactFlash as the primary storage device. By default, EMAC OE is provided with a single ext3 partition on the CompactFlash holding the root filesystem. The most efficient method for repartitioning this type of device is using a CompactFlash card reader on a Linux PC. While command-line tools can be utilized, the application <code>gparted</code> is a graphical application that works very well for resizing existing partitions. Follow the procedure below to resize the existing partition and create a secondary partition on a CompactFlash. The procedure can be modified to generate any partition layout desired.
 
The majority of EMAC's x86-based systems utilize CompactFlash as the primary storage device. By default, EMAC OE is provided with a single ext3 partition on the CompactFlash holding the root filesystem. The most efficient method for repartitioning this type of device is using a CompactFlash card reader on a Linux PC. While command-line tools can be utilized, the application <code>gparted</code> is a graphical application that works very well for resizing existing partitions. Follow the procedure below to resize the existing partition and create a secondary partition on a CompactFlash. The procedure can be modified to generate any partition layout desired.
Line 209: Line 209:
 
  * Modify any necessary applications to store data on the new partition.
 
  * Modify any necessary applications to store data on the new partition.
 
</cl>
 
</cl>
<!--
+
 
 
[[Category:Filesystems]]
 
[[Category:Filesystems]]
-->
 

Revision as of 13:34, 3 January 2014

TODO: {{#todo:needs new version for Ubuntu (12.17.13-00:30->MD+);(12.17.13-15:05->KY+);(12.17.13-19:15->MG+)|Mike Dean|oe 4,oe 5,md,ky,mg,Complete}}

The majority of EMAC's x86-based systems utilize CompactFlash as the primary storage device. By default, EMAC OE is provided with a single ext3 partition on the CompactFlash holding the root filesystem. The most efficient method for repartitioning this type of device is using a CompactFlash card reader on a Linux PC. While command-line tools can be utilized, the application gparted is a graphical application that works very well for resizing existing partitions. Follow the procedure below to resize the existing partition and create a secondary partition on a CompactFlash. The procedure can be modified to generate any partition layout desired.



Setup

  1. Power down the target board and carefully remove the CF card.

  2. Insert the CF card into the CF reader connected to a Linux PC.

  3. The system will most likely bring up a window asking what to do with the device once it is detected. If this occurs, select Do Nothing or a similar option to indicate that the device should not be mounted automatically.

Determine which Device to Use

Next you must determine the device node corresponding to the CF disk. There are several methods that can be used to accomplish this as described in the procedure below:

  1. dmesg can provide information about the disk that was reported by the kernel when it was detected as shown below.

    developer@ldc:~$ dmesg | tail
    [7414822.178026] sd 6:0:0:1: [sdc] 4001760 512-byte logical blocks: (2.04 GB/1.90 GiB)
    [7414822.179094] sd 6:0:0:1: [sdc] Assuming drive cache: write through
    [7414822.180711] sd 6:0:0:1: [sdc] Assuming drive cache: write through
    [7414822.180716]  sdc: sdc1
    

    In this example, sdc is the device corresponding to the CF disk. Also note that the size reported matches the expected size for the CF disk (2 GB in this case). The output also shows that a single partition was detected on the device: sdc1.

  2. The fdisk command can also be used to list the available devices using the -l option. An example output is shown below.

    developer@ldc:~$ sudo fdisk -l
    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Disk identifier: 0x00000000
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1       60302   484375783+  83  Linux
    /dev/sda2           60303       60801     4008217+   5  Extended
    /dev/sda5           60303       60801     4008186   82  Linux swap / Solaris
    
    Disk /dev/sdc: 2048 MB, 2048901120 bytes
    64 heads, 62 sectors/track, 1008 cylinders
    Units = cylinders of 3968 * 512 = 2031616 bytes
    Disk identifier: 0x6a5f7029
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sdc1   *           1        1008     1999871+  83  Linux
    

    Two devices are listed in this output: /dev/sda and /dev/sdc. Looking at the disk sizes, /dev/sdc matches the 2 GB size of the CF card (2048 MB as listed in the output above).

  3. After checking the dmesg and fdisk output, inspect the mount locations on the system to verify that the correct disk is being used and that it has not been mounted by the system. In the example below, the grep command is used to search the output of the mount command for the string "/dev/sd".

    developer@ldc:~$ mount | grep /dev/sd 
    /dev/sda1 on / type ext3 (rw,errors=remount-ro)
    

    This output illustrates that /dev/sda1 is the root filesystem and /dev/sdc1 is not mounted.

Given the results from these three commands, /dev/sdc is the CF disk. If /dev/sdc1 is mounted, it should be unmounted before continuing.

developer@ldc:~$ sudo umount /dev/sdc1

Do not continue if you are not certain which device node corresponds to the CF disk.


Backup the Existing Filesystem

After determining the CF disk on the system, make a backup of the CF disk to ensure that it can be restored if something goes wrong during the repartitioning process. The steps below assume that /dev/sdc is the CF disk as determined in the example above. Replace the /dev/sdc occurrences with the appropriate device for your system.

  1. Begin by mounting the CF disk. It is important to do this manually rather than having the system auto-mount the device to prevent it from being mounted with options that could make it difficult to obtain a complete archive. The listing below demonstrates how to mount the CF disk to a temporary directory:

    developer@ldc:~$ sudo mkdir /mnt/cf
    developer@ldc:~$ sudo mount /dev/sdc1 /mnt/cf
    

    After mounting, inspect the files at the mount point and verify that the filesystem is there as expected:

    developer@ldc:~$ ls /mnt/cf
    bin  boot  dev  etc  home  lib  lost+found  media  mnt  proc  root  sbin  sys  tmp  usr  var
    
  2. Use tar to create a gzipped tar archive of the entire flash. The following commands will create a backup archive named /home/developer/rootfs-backup/rootfs_20130404.tar.gz:

    developer@ldc:~$ cd /mnt/cf
    developer@ldc:~$ sudo tar czvf ~/rootfs-backup/rootfs_20130404.tar.gz *
    
  3. Unmount the CF disk once the backup is complete:
    developer@ldc:~$ cd
    developer@ldc:~$ sudo umount /dev/sdc1
    

Repartition the CF Disk using Gparted

At this point you will need to decide on a partition scheme to use. In this example, the primary partition and ext3 filesystem will be resized to 200 MB and a new primary partition will be created. Depending on the application requirements, you multiple primary partitions can be created, or an extended partition with multiple logical partitions.

Follow the steps below to repartition the CF disk.


  1. Start the gparted utility, passing the CF disk device node as an argument as shown below:

    developer@ldc:~$ sudo gparted /dev/sdc
    

    This should bring up a window similar to the one shown in Figure 1.

    Figure 1: Gparted Initial View


  2. Click on the partition to select it and press the Resize/Move button. Enter 200 in the New Size (MiB) setting in the new window that appears as shown in Figure 2. Press Resize/Move to queue this operation and return to the main window.

    Figure 2: Gparted Resize Details Dialog


  3. You should now see the primary partition followed by a large unallocated section. Although it is acceptable to continue making all changes before applying the changes, it can be advantageous to apply changes in steps. Press the Apply button to execute the pending operations required to resize the root partition and filesystem. A window will appear with the operations and their status. You may view details for each operation as it is executed. See Figure 3 for an example. Press Close to return to the main window once all operations have completed.

    Figure 3: Applying Pending Resize Operations in Gparted


  4. To create a new partition in the unallocated portion of the disk, click on the unallocated section to select it and press the New button. A new window will appear to enter the details for the partition. After entering the settings below (also shown in Figure 4), press Add to queue the required operations.

    1. Create as: Primary partition

    2. Filesystem: ext3

    3. Use the maximum allowed size for the New Size setting

    Figure 4: New Partition Details in Gparted


  5. The device layout should reflect the new partition as shown in Figure 5 on the main window. Press Apply to commit the changes to the disk.

    Figure 5: New Partition Pending in Gparted


  6. After all operations finish, verify the device layout and partition table as shown in the main window of gparted. Figure 6 shows that /dev/sdc1 is the resized root filesystem and that /dev/sdc2 is the new data partition.

    Figure 6: Gparted Window After Creating New Partition


  7. Close gparted.

Reload Filesystem

Follow the instructions here to reload the backed up filesystem.

Configure the Target Board

After repartitioning the CF disk, it is necessary to configure the target board to tell it where and how to mount the new partition. In this example, the new partition will be mounted on /mnt/data but any mount point may be used.

  1. Insert the CF card into the target board and apply power to the system.

  2. Log in as the root user after the system has booted.

  3. Verify the root disk and partitioning using the fdisk command as shown below.

    root@emac-oe:~# fdisk -l 
    Disk /dev/sda: 2048 MB, 2048901120 bytes
    255 heads, 63 sectors/track, 249 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    
       Device Boot      Start         End      Blocks  Id System
    /dev/sda1   *           1          25      200781  83 Linux
    /dev/sda2              26         249     1799280  83 Linux
    

    The output above shows that /dev/sda is the CF disk on this system and the new partition scheme was recognized correctly.

  4. Add an entry to the system file, /etc/fstab, to specify the mount parameters. Note that depending on the system, the new partition may be auto-mounted as a removable storage device. In this case, it was mounted on /media/sda2 as shown from the mount command:

    root@emac-oe:~# mount | grep sda2 
    /dev/sda2 on /media/sda2 type ext3 (rw,sync,relatime,errors=continue,barrier=1,data=writeback)
    

    Even if the device is auto-mounted, EMAC recommends adding an entry to the fstab to specify the exact parameters for mounting the new partition as described below.

    1. Create the new mount point: /mnt/data.

      root@emac-oe:~# mount -o remount,rw /
      root@emac-oe:~# mkdir /mnt/data
      
    2. Edit the fstab to specify the new mount. For CF disks using ext3, EMAC recommends specifying the following mount parameters: noatime, barrier=1 and data=journal. (See this page for more information on how to edit a file.)

      root@emac-oe:~# vi /etc/fstab
      

      Add the following entry in the file from vi:

      /dev/sda2    /mnt/data    ext3    rw,noatime,barrier=1,data=journal    0 0
      
    3. Mount the partition with the new settings and verify that it mounts correctly.

      root@emac-oe:~# mount -o remount,ro /
      root@emac-oe:~# umount /dev/sda2
      root@emac-oe:~# mount /dev/sda2
      root@emac-oe:~# mount | grep sda2 
      /dev/sda2 on /mnt/data type ext3 (rw,noatime,errors=continue,barrier=1,data=journal)
      
    4. Modify any necessary applications to store data on the new partition.