Difference between revisions of "EMAC Example Projects"
| (5 intermediate revisions by the same user not shown) | |||
| Line 26: | Line 26: | ||
== Example Projects for Specific Products == | == Example Projects for Specific Products == | ||
| − | * [[example_brightness|The 'brightness' example project (under review)]] - | + | <!-- * [[example_brightness|The 'brightness' example project (under review)]] - --> |
* [[LED_example|The 'ipac_led' example project ]] - demonstrates use of GPIOs with the '''iPac9x25''' LEDs | * [[LED_example|The 'ipac_led' example project ]] - demonstrates use of GPIOs with the '''iPac9x25''' LEDs | ||
| − | * [[example_sights_and_sounds|The 'sights-and-sounds' example project | + | * [[example_sights_and_sounds|The 'sights-and-sounds' example project ]] - demonstrates the use of a 7" LCD Touchscreen and audio outputs |
| − | + | <!-- * [[example_SoM_150es_keypad_lcd|The 'SoM-150es-keyboard-lcd' example project (under construction)]] - --> | |
| − | * [[example_SoM_150es_keypad_lcd|The 'SoM-150es-keyboard-lcd' example project (under construction)]] - | ||
* [[Example_MikroBus_Rotary_on_the_DEV-IOT6U|MikroBus Example on the DEV-IOT6U]] - a demonstration of the use of the MikroBus on the '''DEV-IOT6U''' | * [[Example_MikroBus_Rotary_on_the_DEV-IOT6U|MikroBus Example on the DEV-IOT6U]] - a demonstration of the use of the MikroBus on the '''DEV-IOT6U''' | ||
Latest revision as of 12:44, 19 October 2020
Example Projects
- CAN - demonstrates the use of the CAN bus
- 'fbench' - a floating point benchmark which tests the accuracy and speed of floating point operations on the target systems
- 'getkey' - demonstrates how to use a keypad with a SoM150ES carrier board
- 'hello' - basic "hello world" project
- 'i2c test' - writes and reads bytes to a selected register on the I²C device
- 'libgpiod io' [OE5.X] - covers basic GPIO usage for the IPAC single board computer, and 150 and 200 series carrier boards
- 'pthread demo' - demonstrates how to use pthreads
- 'serial' - application performs an asynchronous IO test on the specified serial device using either poll or FASYNC mode.
- 'socket' - demonstrates how to set up host and client node sockets on an Ethernet network
- 'spi test' - demonstrates how to use a 12 bit A/D converter chip (mcp3208) with SPI Serial Interface
- 'timer' - demonstrates how to use the software timer
- 'watchdog' - demonstrates how to use the watchdog timer (a hardware circuit that can reset the computer system in case of a software fault)
Example Projects Specific to the EMAC SDK 4.X
- 'atod_test' - demonstrates reading the channels of an indexed AtoD device
- 'io demo' - provides four demos using SOM-150ES carrier board I/O
- 'egpc' - demonstrates reading, writing and configuring the GPIO ports
- 'mcp4922 test' - demonstrates how to access the on-board DtoA of an EMAC SoM-150ES carrier board
Example Projects for Specific Products
- The 'ipac_led' example project - demonstrates use of GPIOs with the iPac9x25 LEDs
- The 'sights-and-sounds' example project - demonstrates the use of a 7" LCD Touchscreen and audio outputs
- MikroBus Example on the DEV-IOT6U - a demonstration of the use of the MikroBus on the DEV-IOT6U
