Difference between revisions of "EMAC Example Projects"

Revision as of 10:29, 25 September 2020

The 'can' example project (under construction) -
The 'fbench' example project - a floating point benchmark which tests the accuracy and speed of floating point operations on the target systems
The 'getkey' example project - demonstrates how to use a keypad with a SoM150ES carrier board
The 'hello' example project - basic "hello world" project
The 'i2c test' example project - writes and reads bytes to a selected register on the I²C device
The 'libgpiod io' example project [OE5.X]- covers basic GPIO usage for the IPAC single board computer, and 150 and 200 series carrier boards
The 'pthread demo' example project - demonstrates how to use pthreads
The 'pthread hello' example project - another demonstration of pthreads
The 'serial' example project - application performs an asynchronous IO test on the specified serial device using either poll or FASYNC mode.
The 'socket' example project - demonstrates how to set up host and client node sockets on an Ethernet network
The 'spi test' example project - demonstrates how to use a 12 bit A/D converter chip (mcp3208) with SPI Serial Interface
The 'timer' example project - demonstrates how to use the software timer
The 'watchdog' example project - demonstrates how to use the watchdog timer (a hardware circuit that can reset the computer system in case of a software fault)

The 'atod_test' example project - demonstrates reading the channels of an indexed AtoD device
The 'io demo' example project - provides four demos using SOM-150ES carrier board I/O
The 'egpc' example project - demonstrates reading, writing and configuring the GPIO ports
The 'mcp4922 test' example project - demonstrates how to access the on-board DtoA of an EMAC SoM-150ES carrier board

@@ Line 11: / Line 11: @@
 *  [[example_hello|The 'hello' example project]] - basic "hello world" project
 *  [[example_i2c_test|The 'i2c test' example project]] - writes and reads bytes to a selected register on the I²C device
-*  [[Libgpiod_IO_Example|The 'libgpiod io' example project]] [5]- covers basic GPIO usage for the IPAC single board computer, and 150 and 200 series carrier boards
+*  [[Libgpiod_IO_Example|The 'libgpiod io' example project]] [OE5.X]- covers basic GPIO usage for the IPAC single board computer, and 150 and 200 series carrier boards
 *  [[example_pthread_demo|The 'pthread demo' example project]] - demonstrates how to use pthreads
 *  [[example_pthread_hello|The 'pthread hello' example project]] - another demonstration of pthreads